Hey! Sending some :karma: your way for your micro grow. Always loved micro grows!!
Regarding your venting. Hot air rises and you should have a vent somewhere near the top of the case (exhaust), the intake should be somewhere lower pulling fresh air into the case, intake should be on one side of the case, and the outake on the other. About the carbon filter it depends on security, most people would agree to just buy a carbon filter as smell can compromise your entire grow.
rIGHT SO IV DECIDED to use about 100 W. might use 120-150 for 2. Now its deciding how i would go with my exhaust and intake. Would ONE pc fan a medium sized one at like 80-100 MM + carbon filter and a passive intake of 2 of them vents in my first post or a intake fan at around 20-400 MM be enough?
I've personally never measured my fans and just buy whatever is on the shelf at a computer store. I don't suggest passive intakes. Much better if you have 1 intake and 1 outtake both fans pulling air in and out of the case for the plant(s). Also don't forget to read a guide on how to "LST" it's called "Low Stress Training" and allows you to maximize yield in a small space, very useful stuff you can search it up on here.
Also remember your carbon filter doesn't go on the intake, it does on the exhaust.
Do you have any strains in mind that you're going to grow?
aW THAnks man! yeh i wud be such an idiot if i put the carbon on the intake LMAO!!!!!! yeh im just gonner get a higher power fan for exhaust and lower power fan for intake. Wud light trap be needed? wud i be able to pull off 2 off a 100 W?
Hi nima i have one plant in my micro grow and im running a 200w duel spectrum and i have two 35w red spec blubs ready to put in if needs be check out my grow for ideas if you like if u have any question please ask
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.