Indoor My First Tent Set-up

[Lumiere]

Hi all;

I am trying to build my first tent for auto growing in soil. I do understand every step except carbon filter and ventilation system. And i want to list my equipment below so if anything sounds weird, please warn me asap cause will be shopping this weekend.

My tent will be 240x120x200cm
I am planning to fit 10 15LT pots in to this tent?
The shop owner advise 2x600w MH lights with this set up?(HPS when the time comes) Do you guys think this is correct?
and do you think 800m3 carbon filter will be enough for this set up?
What about inline clean air fan? should it be half size of the the outtake fan which is connected to carbon filter ?

Thanx in advance

 

[medic grower]

Well if the Budged dont counts that much i would advise to switch the 2x 600 watter sets against some Led Panels in the end it will be same prices or even saved money if you look on electric bill and they make way denser buds ect with less energy. Filter and Outtake must be Ok and i would suggest a round 300cbm Intake for such a big tent. Airflow is very important.

 

[Happy Horticulturist]

Living in Istanbul 2 x HPS on top of your ambient temperature will get really high temperatures indoors. Think of it like having a heater on.

LED lighting will use much less electricity and it will make much less heat.

Unless you have air conditioning inside you need to be thinking about the fact the heat will definitely go up by several degree celcius and the fact that plants prefer temperatures around 22 - 26 degrees celcius.

The bigger the fan and filter the better, you can always get a fan speed controller, or hook it up to a temperature controller or something. Is that 800m3 per hour? Ideally you want the fan to be able to exchange the air in your room fully once ever 2 minutes.

Inline fan should be almost equal to the out take fan. Just a little less. I would make the size of the intake fan the same, but use a controller to decrease it's speed slightly. You want negative pressure in the grow room, but not so negative the out take fan is having difficulty pulling air out because it's having such a hard time pulling replacement air in.