Lighting Revolution micro Avici

[derek420colorado]

Revolution Micro

INSTRUMENT-GRADE LED LIGHTING SOLUTIONS FOR SCALE CULTIVATION The Avici horticultural LED series brings aerospace-grade reliability to industrialgreenhouse and indoor growing environments worldwide. Higher yields, lower energy costs, and powerful precision control of ourprogrammable spectrum...

revolutionmicro.com

Has anyone heard of these lights or used them possibly? It has a programmable spectrum, which if it works would be bad ass!

 

[Death The Cultivator]

Revolution Micro

INSTRUMENT-GRADE LED LIGHTING SOLUTIONS FOR SCALE CULTIVATION The Avici horticultural LED series brings aerospace-grade reliability to industrialgreenhouse and indoor growing environments worldwide. Higher yields, lower energy costs, and powerful precision control of ourprogrammable spectrum...

revolutionmicro.com

Has anyone heard of these lights or used them possibly? It has a programmable spectrum, which if it works would be bad ass!

https://scynceled.com/ These are high bay tuneable spectrum lights as well with better diodes then the one you linked.

Bridgelux has 2ft vesta strips that have a 2700k/5000k channel that you can mix and program through a driver, DMX, or ilumi meshtek.

CLW also has a tuneable spectrum.

Do you think it would help in the LAGs?

 

[Son of Hobbes]

Revolution Micro

INSTRUMENT-GRADE LED LIGHTING SOLUTIONS FOR SCALE CULTIVATION The Avici horticultural LED series brings aerospace-grade reliability to industrialgreenhouse and indoor growing environments worldwide. Higher yields, lower energy costs, and powerful precision control of ourprogrammable spectrum...

revolutionmicro.com

Has anyone heard of these lights or used them possibly? It has a programmable spectrum, which if it works would be bad ass!

Your pal Jeffrey Kush Coach uses them. They seem like nice lights from what I've seen on 'em.

 

[Son of Hobbes]

Revolution Micro

INSTRUMENT-GRADE LED LIGHTING SOLUTIONS FOR SCALE CULTIVATION The Avici horticultural LED series brings aerospace-grade reliability to industrialgreenhouse and indoor growing environments worldwide. Higher yields, lower energy costs, and powerful precision control of ourprogrammable spectrum...

revolutionmicro.com

Has anyone heard of these lights or used them possibly? It has a programmable spectrum, which if it works would be bad ass!

I think you should look into high efficiency LED's on light rails for the LAG. I mean the proof would be in the pudding, but I can see you dropping the lighting req down by 1/3 to 1/2 easily (with the right lights.) Array design (light bars,) and just have those babies moving back and forth all day, along with the natural sunlight? Is it hot in here? It feels sexy just typing this.

 

[derek420colorado]

I think you should look into high efficiency LED's on light rails for the LAG. I mean the proof would be in the pudding, but I can see you dropping the lighting req down by 1/3 to 1/2 easily (with the right lights.) Array design (light bars,) and just have those babies moving back and forth all day, along with the natural sunlight? Is it hot in here? It feels sexy just typing this.

Hehe yeah I know man it still gives me a Chubby. So it usually only uses the lights at night. When it’s cloudy I will turn them on also. And they run like an hour in the morning as the sun is coming up and an hour as they it’s going down. The thing with the light rails is I don’t know if it will work with the frame for the “light in” shade system.

https://scynceled.com/ These are high bay tuneable spectrum lights as well with better diodes then the one you linked.

Bridgelux has 2ft vesta strips that have a 2700k/5000k channel that you can mix and program through a driver, DMX, or ilumi meshtek.

CLW also has a tuneable spectrum.

Do you think it would help in the LAGs?

I am goin to look right now. I knew I was forgetting to tag someone it was YOU @damien50 lol. Thanks for weighing in.

Here is the challenge, I am trying to get something that I can either use the .5” extruded aluminum frame as the heat sink or be able to attach it To the frame without it cause if too much more of a shadow. I don’t have enough familiarity with LED’s at all like I have never used an led ever lmao. Can I Just hire you to build me a custom solution for the prototype? I know you have the knowledge and skill

 

[Death The Cultivator]

Hehe yeah I know man it still gives me a Chubby. So it usually only uses the lights at night. When it’s cloudy I will turn them on also. And they run like an hour in the morning as the sun is coming up and an hour as they it’s going down. The thing with the light rails is I don’t know if it will work with the frame for the “light in” shade system.




I am goin to look right now. I knew I was forgetting to tag someone it was YOU @damien50 lol. Thanks for weighing in.

Here is the challenge, I am trying to get something that I can either use the .5” extruded aluminum frame as the heat sink or be able to attach it To the frame without it cause if too much more of a shadow. I don’t have enough familiarity with LED’s at all like I have never used an led ever lmao. Can I Just hire you to build me a custom solution for the prototype? I know you have the knowledge and skill

If you wouldn't mind I think something cool could be done. Message me.

 

[derek420colorado]

If you wouldn't mind I think something cool could be done. Message me.

Pm sent