hello all i just moved so i have a new grow area to setup. its 10 x 10 x9ft ceiling. the walls are covered in white plastic and the floor is concrete, with a sump pit in the floor with a nice cover. i have a 50 gallon resevoir setup with air stones and a pump to stir the water around and to feed the hose for watering. the drain is ran out the side to the sump hole already tested the drains and it works great no more catching drain waste water into a tank. the plastic is like panda film but thicker and it is taped at the top and all seams. the celing has insulation and a plastic vapor barrior to protect agains moisture. this room has an exhaust fan and exit into the wall to change out the moist air to help against mildew, i have had the temp guage and the high is 79 Degree humidity 51%, the low is 75 with humidity of 53%. i have a dehumidifier and another 8 inch fan to use for lights and carbon filter if i go the hps route. i have a new room and 0 ideas. any help would be taken. thank you