DIY CO2 Hookah

[Eyes on Fire]

:firedevil: Hey guys.I thought I'd share a very effective CO2 system that a friend of mine picked up at the Emerald Cup last year.It work quite well and will give you a week or a touch more depending on heat,amount of air pushed through n so on n so forth.

You get a small styrafoam cooler and cut out a square in one corner that you can pull the unit in and out from.Should not be a tight fit.slide freely.

get a 2-3 Gallon Pump sprayer,cut the hand attachment off,but utilize the black hose.Drill 2-4 holes,scuff up the area around the hole.Insert Aqua tube(s),apply RTV(room temp vulcanization) and let set up overnight.

put a piece of wood to sit the Air pump on so it dont cause any issues with heat.Inside the cooler that is.fill sprayer with 1 -1.5 gallons and add 1-1.5 Packs dry active yeast and 1-2 cups white sugar.set inside cooler,attach airline.set in the corner you cut out and the low heat from the Air pump will keep it very actively warm and will put out a considerable amount of CO2 for a lil less than ,or more than a week.easy to move,clean and take away and add hoses for multiple fans.

I personally dont use a cooler to be truthful.but run two of these.well I do now.so, I thought Id share this since its an extremely effective unit for a DIY'er. I think thats all,Im rather tired.ill take another look at this and take away and/or add to this later on today if I think is wierd.

Pics should go a looong way to explain how it works.with or without the cooler.Be well everyone and Happy Growing AFN Family!!


Hop digity yer flowers should stand up and SHOUT using this.

 

[Eyes on Fire]

second step after drilling sized Holes

As I slowly try workin around my schedule to get another one slapped together,I thought Id share with ya a lil proper.Its really a great Unit.Esp. instead of a regular ole 5 Gallon bucket and lends itself reallr reeaalllly well indoors too.

After hole(s) are drilled scuff up with 6 grit sandpaper.coat the outside of the Aquatube where it'll meet the Sprayer then put the tube in a neutral position and coat well with RTV or similar sealer.

Next step,chop the handle/pump and fix styrafoam cooler. till then.

 

[Eyes on Fire]

I got my small 5$ cooler to cut up.ill try n do that this weekend so you can see how the heat works.long hoses will enable you to use it outside of a smaller grow area(s) and feed the tubes in if you so desire.