Grow Mediums FIRST AUTO's Grow: Sweet Seeds Dark Devil and Visions Northern Lights

[DWCocha]

looks like there growing bud .your res temps could cause you problems though & a quick fix to drop it by a couple of degrees is to move the air pump to a cooler spot outside the cab/tent :Sharing One:

 

[teerowdy]

Day 17
They starting to get ups

 

[growbeast]

Subbed...debating between dark devil, black cream or Buddhas pk auto...beautiful girls you have

 

[teerowdy]

so far so good. thanks

 

[teerowdy]

Hello guys and gals, here to give you an update. I might loose the NL soon. I noticed at the beginning of the media the stem is starting, well has been rotting and i don't kno what to did. If anyone can help with that let a brutha kno Asap. She's come to far to fall off like dat... Shes hangin in dere tho..
Anyways Day 21
GS Temp 75*F, Hum 60%, Water: Temp 70*F, PPM 823
Preflowers starting to show on NL. Looking good 6ins in ht so far. DD getting very thick, four days younger than NL she is bout 4in in ht. Heres pics.



Give me feed back guys, I'm in unthreaded waters.

 

[teerowdy]

what the heck is dis shyt???

 

[teerowdy]

just lost the nl, wasnt paying attention to the main stem. i guess if i don't get any help, ill loose my DD ALSO. the rapid rooter has exactly the same.. i don't kno what it is.

 

[briman]

Here is what you are gonna need, Get some H2O2 and mix it 50/50 with plain water, put some gloves on and spray the rotten parts and the root riot heavily!! Then you are going to need something Hygrozyme for your rez, then when you put it all back, make sure you completely cover the root riot with hydroton so no light can get to it. Check your temps in your temps and make sure if you can swing it, I noticed in your first set of picks in post 1, I would use a roll of black electrical tape and black out the whole clear portion of your rez!! That should do it.

 

[teerowdy]

thanks im on it. i don't have any hygrozyme can i put some h202 in my rez? Fingers crossed.... Thanks again

 

[teerowdy]

Here is what you are gonna need, Get some H2O2 and mix it 50/50 with plain water, put some gloves on and spray the rotten parts and the root riot heavily!! Then you are going to need something Hygrozyme for your rez, then when you put it all back, make sure you completely cover the root riot with hydroton so no light can get to it. Check your temps in your temps and make sure if you can swing it, I noticed in your first set of picks in post 1, I would use a roll of black electrical tape and black out the whole clear portion of your rez!! That should do it.

i should have some hygrozyme by this Fri, how much do i add to my res and so on???