Lighting HLG-240H-C1400B thx to BigSmO

[Bliciu86]

Hi everyone I'm polish living in uk so wanna sorry for my writing if som
I've asked for desent set up to my tent 80x80x160 and that's what I'm gonna get thanks to BigSm0 for helping me with parts
1xHLG-240H-C1400B
5x citizen CLU048-1212C4-353H6K2
5x cob holders
5x reflectors
That's gonna b 250 from wall I'll put them on
Deep Aluminium LED Cooling Heatsink for my size I'll go for two of 140 mm x 600 mm and two of 120mm fans

 

[BigSm0]

Think we can get some pictures when it's done?

 

[Bliciu86]

Ya man will do

 

[WalterW]

Sounds real good
waiting patiently to see how this turns out

 

[Groff]

@Bliciu86 Hey buddy, it would be cool to post pictures of the work in progress too.

Not only it's great for us who follow the thread to have some updates, but also to learn, and for the most advanced, give some insight on the project.
I'm going to take the plunge eventually, really want to build my own light. So I'm just tagging along to learn more.

Got a question about these HLG drivers… are they also able to power the fans? I really hate the design where you have one driver for the light, and an old nokia charger or whatever, for the fan. Takes too much plug real estate. I saw a video on youtube where a dude wired it all up to one driver.

 

[Bliciu86]

I don't know m8 can u rUn them from hlg bt u can buy on ebay 2A dc 12v power supply like that
http://m.ebay.co.uk/itm/24W-AC-DC-1...Strip-Light-/311467980688?nav=WATCHING_ACTIVE
Then a famale plug ac like that
http://m.ebay.co.uk/itm/12V-DC-CCTV...:DC Female|Pack Quantity:1&varId=510827908225

A fans I'll get those 120mm they r 3 wires bt u only using two +/-

http://m.ebay.co.uk/itm/4-x-Pack-of...Performance-/162011737624?nav=WATCHING_ACTIVE

N aluminium heatsink for my size probably 2x400mm

http://m.ebay.co.uk/itm/Aluminum-He...a62151d7ffad285c%7Ciid%3A1&varId=430907052394

 

[Bliciu86]

I'm just ordered the citizens clu048 3500k 90ri n hlg 240h 1400b gonna take some time to deliver bt that's give me time to build some frame install the fans just make it ready

 

[ablankley]

Subbed up that's pretty much exactly what I'm about to try to build.
I wanted full passive cooling though but heatsinks are expensive

Sent from my SM-G930F using Tapatalk

 

[BigSm0]

@Bliciu86 Hey buddy, it would be cool to post pictures of the work in progress too.

Not only it's great for us who follow the thread to have some updates, but also to learn, and for the most advanced, give some insight on the project.
I'm going to take the plunge eventually, really want to build my own light. So I'm just tagging along to learn more.

Got a question about these HLG drivers… are they also able to power the fans? I really hate the design where you have one driver for the light, and an old nokia charger or whatever, for the fan. Takes too much plug real estate. I saw a video on youtube where a dude wired it all up to one driver.

They can be put on the same plug but not the same driver. Your best to go with larger heatsinks and letting it cool passively. As long as air stays moving in the space temps of the heatsinks should remain pretty low. Believe it or not this is the main reason I don't like light engines. 2 drivers for a single cob seems kinda crazy to me. I do have the plan for a 150 watt single passively cooled cob coming up. No fans, completely silent and extremely efficient.

 

[Bliciu86]

Slowly I getting my parts so quick updated how's my set up gonna look

And my 58 day old brooklyn sunrise

Cnt wait for my citi 1212 n bang them on