New Grower Is this mold !? am i screwed!?

[Marcuz]

Hey!

went to check on my outdoor grow today and i found some white stuff on the leaf`s
i tried to rub it off but nope, it looks like the leaf is just white, like there wasnt anything special on the leaf, cause nothing happend when i rubbed the leaf`s

But im so afraid all of you are going to say its mold...

heres the pictures!

So whats the judgement? should i harvest the plant what i can? and No white on the flowers, just on the leaf`s !

 

[thetreeman]

ITs powdery mildew, not screwed but its not a good thing either. You can treat with anti fungal or try washing it off, but best bet, if its isolated would be to remove the leaves, or parts of the leaves that are currently affected and hope it doesnt spread.

 

[Marcuz]

Ok thanks...guess im off to trim my plant tomorrow and hope for the best :/

 

[Eyes on Fire]

you can grab a flat tray that'll hold bout 4-5 gallons of water,several inches deep, filtered and a cpl caps (roughly 1/2oz.)of Hydrogen peroxide mixed in and chop to drying length and loosely trim and lightly wash around in the tray and note the oily residue.THAT will wash it off.stick a fan on it and quick dry it after also lightly rinsing the trimmed and washed piece off with fresh water lightly, n piece of cake.Then ya got pretty decently washed quick meds.wash hands n shower right after so ya wont infect anything n voila ,problem solved. Best of luck dude!!"AFN smoke out" but all that is if yer gonna trim n harvest her..

But ya could use a similar solution,as a floiar wash as well as a wetting agent and throughly wet till dripping in the cool evenings or early morning out of direct sunlight.then mid day afternoon treat it with Neem oil IF you plan on keeping it and using it as an oil after washing it really well.but the bigger the flowers and the worse it is...the deeper it most likely will go.so be aware.take it easy man..I hope that helps ya dude.I just recently went through a similar issue myself.:Sharing One: rough trim prior to soak/washing trimmed pieces.

 

[Marcuz]

Ok....i just need to figure out where to get Hydrogen peroxide..

Think i will try cutting off all molded parts and see what happens...

 

[bubblekarma]

Ok....i just need to figure out where to get Hydrogen peroxide..

Think i will try cutting off all molded parts and see what happens...

Pretty much anywhere.. Same places you can get rubbing alcohol. It's pretty cheap too.

 

[Eyes on Fire]

imo I'd stay atleast an inch away from formed flower man.The closer and more you touch tem with the PM n stuff on the scissors the more imbedded it'll become.so word to the wise my friend.leave a little on the and wash em well if yer cutting them. Best of luck n have fun!Before hang drying too,make sure all stuff is cleaned up and a clean fan is sat on em too. be good.dont forget to slightly shake dry em before the fan as well. yeah Im high LOL!"AFN smoke out"

 

[Marcuz]

i can only find it in sprayform and its a 100ml bottle with 3% of it...and thats 9€ -.-

 

[bubblekarma]

i can only find it in sprayform and its a 100ml bottle with 3% of it...and thats 9€ -.-

Make sure you check the pharmacy area of the store. You are looking for that same stuff that you put on your cuts as a child in the brown bottle. I'm in the USA so it might be different over here..? It's also used in dental hygiene so you might be able to find it around those parts of a store as well.

 

[Marcuz]

How strong should it be ? more like 30% ? need to check the pharmacy