Grow Mediums LETS ROCK!!! 2x DWC buckets 1 LED Mars 1200w 2xDUTCH PASSION SEEDS with DUTCH PRO nuts

Which Seeds You Want to See


  • Total voters
    6
  • Poll closed .
lookin good man ...but those temps are a bit high & you will get light in the res if you leave the net pots uncovered like that ... mylar covering them & the bucket lids will drop temps a bit too :Sharing One: PH meter is the most important bit of kit you should own bro :grin: not saying you cant grow without one but I would not dare to try :peace:
 
Had to move the rockwool in the pebbles cause I had it too deep in the pot and the light was going in the water as coach said caused some shit inside the water like slime.
Also covered the lids with Mylar almost perfect


fresh water and as I saw the roots was out of the rockwool and prob inside the water right now, I raised the water level so it ll touch the rockwool so they can get some nuts fast to recover from all the stress.


Nuts used:
dutch pro grow a+b 20ml/15l
take root 10ml
multy total 20ml
silicone 7ml
Cal mag 5 ml

Ec:1.1
ph~ 5,5


after all the movement the poisson lady's leafs are pointing down, I hope she will take a good rest in the night and be ok tommorow


and Smart lady's new leafs have some colour deformation but they keep growing all day, so fast that I can actually watch it grow hour by hour

PS: Thank you DWCocha for all your advices and help!!!
:Sharing One: :thank:
 

Attachments

  • image.jpg
    image.jpg
    33 KB · Views: 50
  • image.jpg
    image.jpg
    31.3 KB · Views: 59
  • image.jpg
    image.jpg
    66.9 KB · Views: 55
  • image.jpg
    image.jpg
    92.2 KB · Views: 50
Last edited:
The first root show itself but it is abit too high and not at the bottom of the pot :S
Both of them have the root at around the same place.. Should I raise the water to help the root touch it?
also TD keep having a bit of yellowish colour at the tip of new leafs should I worrie?
Photos are from last night when lights went off so no pink colours... the new leafs are allmost double right now I ll get a better photo from think diferent leafs when the lights go off!!
 

Attachments

  • image.jpg
    image.jpg
    44.7 KB · Views: 57
  • image.jpg
    image.jpg
    118 KB · Views: 68
  • image.jpg
    image.jpg
    94.7 KB · Views: 65
Last edited:
Hi Bam ,sorry I did not reply yesterday .Have been a bit unwell the last few days but ok now .:Sharing One:

Honestly you need a PH meter for this grow to work my friend ...even a cheap one & a bottle of calibration fluid will be much much better than the strips . PH is the most important bit ...if its wrong the plant cant feed & this could be whats going on with the pale one ?

Can you tell us what went in to this res & the PPM 's after ... she might be a bit hungry still ?.


Nuts used:
dutch pro grow a+b 20ml/15l
take root 10ml
multy total 20ml
silicone 7ml
Cal mag 5 ml

Ec:1.1
ph~ 5,5

just looked back :stoneslap: All looks good to me , it maybe a bit early for silicon yet but other than that your nutes seem ok ,So I will guess the problem is your PH reading are not accurate enough.
 
Last edited:
Is there any hope I save my small baby?
the "pale" is spreding on the lower leaf :'( I raised the ph by adding some bottled water to allmost 6 it was close to 5 but I cant say exactly... the replacement HANNA meter is on the way to me, I am waiting for the postman day by day.. all i need is my babies to survive untill he is here (we had easter vacation too the last weak so it got some delay on the delay too :( )
Should I keep the ph to 6 and maybe a small drop ph down where i can have a clean view of it as human possible...
:cuss::fire:
 
Should I cut the part of the leaf that is drying out to help the plant?
 

Attachments

  • image.jpg
    image.jpg
    85.3 KB · Views: 56
I think I have a small problem with ventilation chamber now that i checked it again :'(

The inside Height of cabinet is 180cm exactly, but I thought of adding one Ventilation Chambet where the hot air will go with the help of the fan then to the carbon filter and out from a simple hole at the back of the cabinet.
The problem is that after I installed the chamber I have only 150cm height to place my led and plants(that is only for the half cabinet the rest is still 1.80) cause the shelve is same length with the doors.

Should I keep it or just remove it and install the exhaust system somewhat diferent and if yes how?
View attachment 340345

You want your fan to draw air thru the filter, not push it thru. The filters are designed to be used on the intake side of a fan.
 
yep I did it that way but my fan is too small for that closet so I went and ordered a big one :D waiting to come so I can creat a box for it too!! :D
 
Stoners Sunday today and a fresh nuts change for the girls.

12l of deionized water
10ml Dutch pro take root
5ml plant magic+ magn+cal
6ml vital link silicon
30ml Dutch pro grow A+B
ec: 1.2
ph: 5,5 color tested ( maybe tomorrow I get my new ph tester from postman)

my smart lady is growing beautiful and a bit short I think for her age (2 weeks old from the first baby leaves at 14/4)image.jpg

My poisson lady had a hard week with a couple of leafs drying out, after I fixed the ph she looks to grow like normal and after I cut the problematic leaves the new ones took over to make her a bit bushy.
 

Attachments

  • image.jpg
    image.jpg
    66.4 KB · Views: 54
  • image.jpg
    image.jpg
    84.3 KB · Views: 56
  • image.jpg
    image.jpg
    50.3 KB · Views: 50
  • image.jpg
    image.jpg
    93.9 KB · Views: 55
  • image.jpg
    image.jpg
    98.4 KB · Views: 48
  • image.jpg
    image.jpg
    94.4 KB · Views: 55
Last edited:
hi Bam :Sharing One:good luck & im subbed my friend ...hope your meter turns up soon & its ok to keep PH above 5.7 & below 5.8 now :thumbs:
 
Back
Top