Grow Mediums LETS ROCK!!! 2x DWC buckets 1 LED Mars 1200w 2xDUTCH PASSION SEEDS with DUTCH PRO nuts

Which Seeds You Want to See


  • Total voters
    6
  • Poll closed .
Fuck ... Any solution other than place the carbon filter outside of the box?
Is it ok If I am in the same room with the filter?
I am sleeping pretty close to the cabinet(small house)
put the filter in front of the fan to scrub the smell before extraction :thumbs:
 
Always pull don't push a carbon filter... Negative pressure makes sure all the air goes through the filter. With 4 bottom holes I don't know how to do this you need no other intake other than through the filter to make this work. Remember there is ona gel also....
 
Fuck ... Any solution other than place the carbon filter outside of the box?
Is it ok If I am in the same room with the filter?
I am sleeping pretty close to the cabinet(small house)
Yes you can place it outside of the room and have it the other way round the carbon filter just wont last as long,but the way u want it is for the air to be exhausted outside, i sleep next to my tent and im all good the carbonized air wont effect you at all. If your fan pulls air through your carbon filter and exhausts outside of the tent, it will create negative pressure which should suck in the side of your tent. Meaning it will suck fresh air through every little gap there is.
 
Last edited:
if the fan & filter are extracting air then the cab needs at least a passive intake ?.. so you wont get negative pressure :Hookah:
 
:thumbs: You want negative pressure!
Yes you can place it outside of the room and have it the other way round the carbon filter just wont last as long,but the way u want it is for the air to be exhausted outside, i sleep next to my tent and im all good the carbonized air wont effect you at all. If your fan pulls air through your carbon filter and exhausts outside of the tent, it will create negative pressure which should suck in the side of your tent. Meaning it will suck fresh air through every little gap there is.
 
OK I am done for today, not enought strength left to cover with milar and I want to find a way to stop the fan from shaking the whole cabinet... maybe I hang it and not screw it on it!!

ADVICE TIPS COMMENTS all wellcome thanks for your help today!!
PS: no action from the seeds yet.

IMG_2092.jpgIMG_2089.jpgIMG_2091.jpgIMG_2090.jpg

Oh and i forgot. Can I change the connection of the fan so it suck from the carbon and blow out from the hole at the top left corner as you advised me??
If yes it is no problem to swap the connection, I just did it the way it was on the papers.. but i dont think it will cause any problem right?
 
Back
Top