Since I built it myself with ideas new and borrowed. Used as much of what I had laying around as possible to save a little scratch. And the fact it is growing nothing but dust at the moment meant this should go into the DIY forum
I perused many a forum, used the Google button on the internet machine so much she won’t call me back, and did quite a bit of day dreaming to come up with a simple box on wheels. Top of the food chain I tell you.
I used 5/16 MDF Handi Panels for the skin they come in the handy 2'x4' size...that’s all sides straight without having to break out the square...brilliant. I wanted nothing larger than this so 4 panels, a 3/8 particle board handi panel of the 2'x4' precut would become the top and bottom.That gave me a good surface outside of the 2x2 skeleton pieces to affix things to...MDF other than some spray adhesive just likes to hang out and look pretty.I bought 4 8' 2x2 stud pieces, along with a bit of scrap I had in my scrap bin.
If you use MDF for the skin as I have go ahead and get that Mylar adhered down right away. Take your time and once you get it on real nice like it’s really easy to cut and work with. I used a jigsaw with a clean cut wood blade with very nice results. Most deviations on the cut line with MDF can be washed away with a palm sander and med grit paper, handy when you stray and always stray fat.
A rats nest I know, it's still in beta.
The carbon filter was a DIY idea I stole and recreated
Love piano hinge
Mobile
She sits on 4 25lb ball bearing casters. Door was a scrap piece I had about.
An action pic with my new BS 135 doing its thing. I will add at least 2 CFL's once there is something in the box that cares about such things.
A few more details and it should be ready to go. I am waiting on my first order to arrive and the "Orgin post..." message on USPS is killing me LOL So keep busy it is.
Thanks for looking hope its not to hard on the eyes LOL
Cheers!
I perused many a forum, used the Google button on the internet machine so much she won’t call me back, and did quite a bit of day dreaming to come up with a simple box on wheels. Top of the food chain I tell you.
I used 5/16 MDF Handi Panels for the skin they come in the handy 2'x4' size...that’s all sides straight without having to break out the square...brilliant. I wanted nothing larger than this so 4 panels, a 3/8 particle board handi panel of the 2'x4' precut would become the top and bottom.That gave me a good surface outside of the 2x2 skeleton pieces to affix things to...MDF other than some spray adhesive just likes to hang out and look pretty.I bought 4 8' 2x2 stud pieces, along with a bit of scrap I had in my scrap bin.
If you use MDF for the skin as I have go ahead and get that Mylar adhered down right away. Take your time and once you get it on real nice like it’s really easy to cut and work with. I used a jigsaw with a clean cut wood blade with very nice results. Most deviations on the cut line with MDF can be washed away with a palm sander and med grit paper, handy when you stray and always stray fat.
A rats nest I know, it's still in beta.
The carbon filter was a DIY idea I stole and recreated
Love piano hinge
Mobile
She sits on 4 25lb ball bearing casters. Door was a scrap piece I had about.
An action pic with my new BS 135 doing its thing. I will add at least 2 CFL's once there is something in the box that cares about such things.
A few more details and it should be ready to go. I am waiting on my first order to arrive and the "Orgin post..." message on USPS is killing me LOL So keep busy it is.
Thanks for looking hope its not to hard on the eyes LOL
Cheers!
