madmerlyn
Lets see how far this rabbit hole goes
- Joined
- Jul 6, 2019
- Messages
- 2
- Reputation
- 0
- Reaction score
- 1
- Points
- 0
- Currently Smoking
- Aurora Indica
Hi AFN members,
New member here. First indoor grow, however been growing a range of entheogens for years so I do have some gardening know how.. Been trying to get on for a while but server issues have prevented me getting on. Been slowly setting up my indoor grow and I finally placed an order for one of these for my 4 x 4 : https://www.cutter.com.au/product/ssk-550-r-vh-kit/
I decided on a mix of 2 x 3000k with 660 deep red , 730 far red , 630 and infa red.. and 2 x 3500k with 660nm.
My thinking is this will be a mix of about 3200k leaning towards qual bud production with enough veg for a lil kick.
However mark is still waiting on the diodes so I still have time to change my mind. Any suggestions from QB LED experts?
My intent is to use the light and tent for autoflowers and then possible flower photos in there with another veg tent.
Should I stick with my mix or just go all 3500k with 660 ? Or all 3000k with the red mix as I will most likely get aseperate veg board down the track?
Also as an alternative I was thinking of running blue strips along the racking with a seperate dimmable driver and then I could Veg with blue strips move to the red for flower and bring back in some blue for the last finishing weeks.. Any thoughts on bringing blue in at the end? Is it worth it? After all my research I am wanting to play around with the blues and reds a bit to increase resin,trich and terp production. Quality is my main aim not yeild so much : )
Anyway any help or response on my spectrum selection would help.
New member here. First indoor grow, however been growing a range of entheogens for years so I do have some gardening know how.. Been trying to get on for a while but server issues have prevented me getting on. Been slowly setting up my indoor grow and I finally placed an order for one of these for my 4 x 4 : https://www.cutter.com.au/product/ssk-550-r-vh-kit/
I decided on a mix of 2 x 3000k with 660 deep red , 730 far red , 630 and infa red.. and 2 x 3500k with 660nm.
My thinking is this will be a mix of about 3200k leaning towards qual bud production with enough veg for a lil kick.
However mark is still waiting on the diodes so I still have time to change my mind. Any suggestions from QB LED experts?
My intent is to use the light and tent for autoflowers and then possible flower photos in there with another veg tent.
Should I stick with my mix or just go all 3500k with 660 ? Or all 3000k with the red mix as I will most likely get aseperate veg board down the track?
Also as an alternative I was thinking of running blue strips along the racking with a seperate dimmable driver and then I could Veg with blue strips move to the red for flower and bring back in some blue for the last finishing weeks.. Any thoughts on bringing blue in at the end? Is it worth it? After all my research I am wanting to play around with the blues and reds a bit to increase resin,trich and terp production. Quality is my main aim not yeild so much : )
Anyway any help or response on my spectrum selection would help.
