Single cob help

[Ivean]

Hi all.
I'm attempting to attach a hbg-60-1400 driver to a 135mm dia pin heatsink. Does anyone know where I can get hold off the connectors that attach the two pieces ?
Preferably in the UK but anywhere will do

Thanks

Sent from my SM-G930F using Tapatalk

 

[wwwillie]

Good morning.
Ya, that's always an issue for me, attaching things. I hate drilling and tapping. You want to mount on top for a one piece unit? Do you have a make and model for the heatsink?
Peace

 

[Ivean]

Hiya.
This is the heatsink
Check out this product on Alibaba.com AppPre-drilled heatsink for CXB 3590 / CLU048 / CXB 3070 COB https://f2rq3.app.goo.gl/?link=http...ibi=com.alibaba.sourcing&isi=503451073&amv=69

It has 4 holes ready for screws in a square in the centre of the pins and the hbg-60-1050 driver has 4 holes to use for fixing but on a much bigger square than the holes in the hestsink.
Am I explaining it well ?
If I need to I can grab some photos when I'm home later

Sent from my SM-G930F using Tapatalk

 

[Slater]

Hiya.
This is the heatsink
Check out this product on Alibaba.com AppPre-drilled heatsink for CXB 3590 / CLU048 / CXB 3070 COB https://f2rq3.app.goo.gl/?link=https://m.alibaba.com/product/60495337520/Pre-drilled-heatsink-for-CXB-3590.html&apn=com.alibaba.intl.android.apps.poseidon&ibi=com.alibaba.sourcing&isi=503451073&amv=69

It has 4 holes ready for screws in a square in the centre of the pins and the hbg-60-1050 driver has 4 holes to use for fixing but on a much bigger square than the holes in the hestsink.
Am I explaining it well ?
If I need to I can grab some photos when I'm home later

Sent from my SM-G930F using Tapatalk

Pics would super awesome, am I understanding you correct... you want to attach the driver to the heat sink ?

 

[wwwillie]

Hiya.
This is the heatsink
Check out this product on Alibaba.com AppPre-drilled heatsink for CXB 3590 / CLU048 / CXB 3070 COB https://f2rq3.app.goo.gl/?link=https://m.alibaba.com/product/60495337520/Pre-drilled-heatsink-for-CXB-3590.html&apn=com.alibaba.intl.android.apps.poseidon&ibi=com.alibaba.sourcing&isi=503451073&amv=69

It has 4 holes ready for screws in a square in the centre of the pins and the hbg-60-1050 driver has 4 holes to use for fixing but on a much bigger square than the holes in the hestsink.
Am I explaining it well ?
If I need to I can grab some photos when I'm home later

Sent from my SM-G930F using Tapatalk

Ya, I got you. Hmmm... I am trying to think where I just the widget. Until I find it take a look at this. You may not want to do it that way with the pin type heatsink. Take a look at the heat flow. I may be wrong but I am sure it should be taken into account. I love the driver and how it mounts but not sure of the type of sink it should mate with.

 

[wwwillie]

Hey!
I knew I saw them somewhere! Take a look at the style of heatsink they use. That is why I was thinking the pin type may not be what you want to combine with the HBG style of driver.
Mechatronix

 

[Ivean]

Yeah that's them. I've tried ordering from there and the postage confused me so I'll have to take another look when not so baked

Thanks all

Sent from my SM-G930F using Tapatalk

 

[wwwillie]

Anytime man, glad we could assist.
It would be great if you could take a few pictures and say a few words about your project.
Peace