Slow growing autoultimate with curled edges of leafs

Yea changing light spectrums immediate like that causes problems sometimes....
 
That's not cool, I didn't even think about it. If it was my ph should I flush it with ph'ed water ? Maybe roots got locked because my ph tester was off big time, but I basically know my tap water and use the same amount of ph down every time. Never had any problems with my water before. Check out these leafs on the autoultimate there are spots that are light green
IMAG0066.jpg
IMAG0065.jpg
IMAG0064.jpg
these spots are on almost all the leafs it has to be root locked and stunted and all sorts of f@#&%? Up
 
Could be a pH problem but leaf cupping is usually one of a few things....

Do you have a fan pointed directly at them?
 
No my fan is pointed at the light then the air bounces off the wall and hits them with a slight breeze. U think I should give her a light feed or just ph'ed water. She looks like she could use it. I usually feed light every water. She has only had one feeding my medium is not dry an inch down it's still pretty moist so I don't want to over water her, but I want to give her a light feed
 
It looks like heat stress humor me and put your temp gauge by the plant top
 
No my fan is pointed at the light then the air bounces off the wall and hits them with a slight breeze. U think I should give her a light feed or just ph'ed water. She looks like she could use it. I usually feed light every water. She has only had one feeding my medium is not dry an inch down it's still pretty moist so I don't want to over water her, but I want to give her a light feed
 
is the slight breeze constant? get an oscillating fan that will give a slight breeze but not constant.
 
you say you give a light feed... Do you get run off when you water? and do you water the edge of your pot all the way around?
 
Rh is at 49% gets up to 64 is the highest I have seen and temps are between 71 to 79 last 24 hours
 
Back
Top