Hi,
If you read around the internet, it would seem that a 70W HPS/MH is suicide in a PC Case (or similar). But here are my findings that I would like to share to anybody who is not sure if a HPS is the way to go:
- I have a PC Big Tower with 26,4inches of height (14 inches for plants)
- A 70W HPS with 2000K and 6600lm
- 2 outtake fans (80mm + 92mm running at low (!) speeds total of around 60CFM and 20dB), a passive intake and a 80mm fan below the HPS to move warm air in the direction of the 92mm exhaust.
- The Ballast is setup externally
- No Cooltube or Glass
My ambient temperatures are around 20�C (69� Fahrenheit). With the HPS on, the temperature just climbs to 23-24�C (73-75� Fahrenheit) 4 inches below the HPS bulb. I can hold my hand just 1 inch below the HPS bulb for minutes without ever getting burned or even a hot feeling.
My conclustion. Go ahead and try it. A HPS in a ventilated case with moderate ambient temperatures are no problem. LST and scrog is necessary (but thats also the case with CFL lightning in Micro Grows). With some powerful blowers maybe even 100-150W could be possible.
Bye. Hope this helps :hug:
If you read around the internet, it would seem that a 70W HPS/MH is suicide in a PC Case (or similar). But here are my findings that I would like to share to anybody who is not sure if a HPS is the way to go:
- I have a PC Big Tower with 26,4inches of height (14 inches for plants)
- A 70W HPS with 2000K and 6600lm
- 2 outtake fans (80mm + 92mm running at low (!) speeds total of around 60CFM and 20dB), a passive intake and a 80mm fan below the HPS to move warm air in the direction of the 92mm exhaust.
- The Ballast is setup externally
- No Cooltube or Glass
My ambient temperatures are around 20�C (69� Fahrenheit). With the HPS on, the temperature just climbs to 23-24�C (73-75� Fahrenheit) 4 inches below the HPS bulb. I can hold my hand just 1 inch below the HPS bulb for minutes without ever getting burned or even a hot feeling.
My conclustion. Go ahead and try it. A HPS in a ventilated case with moderate ambient temperatures are no problem. LST and scrog is necessary (but thats also the case with CFL lightning in Micro Grows). With some powerful blowers maybe even 100-150W could be possible.
Bye. Hope this helps :hug: