S
Stunted
Guest
20ml of Nutrifield A+B in 8 ltrs of PH 7.0 water will drop the PH of said water down to 5.7-5.8, then you add some more additives and that will drop the PH even further.
And starting with a PPM of 0 that 20ml of A+B will get it to around 1000ppm......
You would do well to obtain some Cal/Mag for future use, especially if you are running LED lights.
SO my 10cents says you are torturing your plants with some seriously low PH!
As you are using Coco I would suggest you mix a light mix (10ml A+B in 8ltrs water) and flood that plant on a biblical scale, keep flooding even after it is flowing out the bottom. If it was me I would be putting at least 3x the pot size of liquid through it. You need to get all the stuff out and start fresh.
Flood it every day until liquid runs freely out the bottom, leave to drain well and prop it up so it is not sitting in any water.
Do that for a few days then post some new pics.
Best of luck with your grow,
Stay stoned peoples,
Stunted Calculations

And starting with a PPM of 0 that 20ml of A+B will get it to around 1000ppm......
UMMM NO! just NO....No NO NOThe nutrifield coco a and b are pretty much cal and mag with a couple extras
You would do well to obtain some Cal/Mag for future use, especially if you are running LED lights.
SO my 10cents says you are torturing your plants with some seriously low PH!
As you are using Coco I would suggest you mix a light mix (10ml A+B in 8ltrs water) and flood that plant on a biblical scale, keep flooding even after it is flowing out the bottom. If it was me I would be putting at least 3x the pot size of liquid through it. You need to get all the stuff out and start fresh.
Flood it every day until liquid runs freely out the bottom, leave to drain well and prop it up so it is not sitting in any water.
Do that for a few days then post some new pics.
Best of luck with your grow,
Stay stoned peoples,
Stunted Calculations
