DIY E-Vape THC fluid

[pop22]

Nice info. . I didn't get to the shake stir vibration part of it.. I have an ultrasonic jewelry cleaner thingy. . Hmmmmm.. I'll wait to experiment until I can hey my hands on straight pg

Start a thread or post here! We all want to learn how best to do this!

 

[molegrower]

Start a thread or post here! We all want to learn how best to do this!

All about sharing whatever I find AND try! Thanks again for the input!

 

[OutofAfrica]

I find PG on it's own is to harsh over a period of time . If you google PG and heartburn you will see there are a few people that suffer from it. I've never double cooked my oil but will give it a try when I make some more . For those of you that only vape THC oil you should look into coil rebuilding as it makes so mush difference to the hit you get and the flavour . I like to rebuild my coils for my kanger tanks at 2ohm and vape at 7.5w-8.5w . For a warm vape you want a low ohm , some batteries will not fire under 1 ohm . For a cool vape go for a higher ohm .
Eg.... Power(watts)=voltage (v)*voltage(v)/resistance(Ohms) most ego batteries put out 3.7v when fully charged , divided by the ohms of the coil 2ohm and 2.5ohm
3.7v*3.7v/2ohm=6.84watts
3.7v*3.7v/2.5ohm=5.47watts
So lower ohms = more watts .More watts = higher temperature of the coil = bigger hit per draw if that makes any sense .

There are a few you vids showing how to rebuild all different types of ecig cartos and tanks . I like Rip Tripper , his channel is great if your a vaper
[video=youtube;f_bPqO2tE4o]https://www.youtube.com/watch?v=f_bPqO2tE4o[/video]

 

[molegrower]

I find PG on it's own is to harsh over a period of time . If you google PG and heartburn you will see there are a few people that suffer from it. I've never double cooked my oil but will give it a try when I make some more . For those of you that only vape THC oil you should look into coil rebuilding as it makes so mush difference to the hit you get and the flavour . I like to rebuild my coils for my kanger tanks at 2ohm and vape at 7.5w-8.5w . For a warm vape you want a low ohm , some batteries will not fire under 1 ohm . For a cool vape go for a higher ohm .
Eg.... Power(watts)=voltage (v)*voltage(v)/resistance(Ohms) most ego batteries put out 3.7v when fully charged , divided by the ohms of the coil 2ohm and 2.5ohm
3.7v*3.7v/2ohm=6.84watts
3.7v*3.7v/2.5ohm=5.47watts
So lower ohms = more watts .More watts = higher temperature of the coil = bigger hit per draw if that makes any sense .

There are a few you vids showing how to rebuild all different types of ecig cartos and tanks . I like Rip Tripper , his channel is great if your a vaper
[video=youtube;f_bPqO2tE4o]https://www.youtube.com/watch?v=f_bPqO2tE4o[/video]

Nice info. . I'm not sure how to build the coils. . I picked up a dual coil made for my tank. . Started leaking after a few days.. went back. . Stick with a single coil. As they are having issues with leakage on the duals come to find out. Definitely going to check that guys vids out!

 

[pop22]

I use an Innokin 16b, dual coil, 4 wicks. Works very well good vapor hits well, especially for an over the counter brand. don't want to get into fancy tanks, etc, till I find a good juice formula for canna ejuice.

 

[molegrower]

I use an Innokin 16b, dual coil, 4 wicks. Works very well good vapor hits well, especially for an over the counter brand. don't want to get into fancy tanks, etc, till I find a good juice formula for canna ejuice.

Mine was 25 bucks for the battery part, 15 for the tank and 5 for the coil replacement.. I'm in the same boat.. Once this works. . I'll be looking into different setups[emoji41]

 

[sniper]

I bought a power pen to vape qwiso but they have a wickless e juice tip I have thought about trying if I can figure out the canna ejuice

http://powerpen.com/product/power-pen-oil-atomizer/

 

[molegrower]

I bought a power pen to vape qwiso but they have a wickless e juice tip I have thought about trying if I can figure out the canna ejuice

http://powerpen.com/product/power-pen-oil-atomizer/

More the merrier on this project!

 

[pop22]

i re-cooked my PG/VG a third time. I added about 2 more grams of bud. I hadmalso made some green gragon. I read that you can add up to 10 drops of greendragon per ounce of PG/VG. I added 10 drops to 2 ounces. I've been vaping this for a couple days now, works much better! I can get a decent buzz with 8 to 10 hits. The biggest problem I'm seeing now, is these "pen" size vapes just don't have the oompf to make good clouds of vapor. I've got a MOD clone coming this week that should make BIG clouds of vapor. I believe that is the final piece of the puzzle.

 

[pop22]

I use an Innokin 16b, dual coil, 4 wicks. Works very well good vapor hits well, especially for an over the counter brand. don't want to get into fancy tanks, etc, till I find a good juice formula for canna ejuice.

I've seen the light...lol! a good tank is a key part in this. there are some very good clones of these custom tanks out there also. $200 for a tank and battery I can't do, $60-80 I can, and with clone mods, thats within the budget