Indoor Growing Scrog

I've got fucked lungs copd so I've got this down to an easy method so awesome buds and I use a product to declosrise the water if I can't wait also tons more pics in my sanlight thread as I didn't want to flood ya thread bro also these kerosene krash are due to take down very soon in fact I'd like your opinion on chooparoo
I base harvest time off of bud density and not the trichomes. I like to harvest when my bottom sites are close to being as dense as my top sites, however sometimes it’s hard to tell which are the bottom sites with the way I grow.



420, sir, I was thinking of moving to tap water too. Mine: 220 PPM, largely calcium. 170 PPM is roughly 0.4 EC. Are you able then to get your flowering EC up to around 2.0? And also increase your EC targets all through the growth cycle by about 0.4 EC?
Sorry @Mongoose! I’m not that technical about it and I try not to go above 1.5EC. My starting EC is .07 and I basically cruise though veg and flower at around 1.3-1.5EC. I do bring it down during mid to late flower from salt build up but I try to keep it around 1.5. To be honest… all you really need is 1.3EC to grow healthy plants with big dense colas.

Hello pro cannabis league growers! Soon I will need to supercrop, one of the plants is too big. But the stems look woody. How do you guys supercrop it? This will be my first time supercropping. I'm afraid I can break it😃
As DOA already mentioned, a pair of pliers will be a good tool to have around when supercropping the 420 style. Seems brutal but with a little finesse you can get it done without a problem. Nobody had ever taken a pair of pliers to their canna plants until I started experimenting with it a few years ago and now it’s a key part of the method.
 
Last edited:
As DOA already mentioned, a pair of pliers will be a good tool to have around when supercropping the 420 style. Seems brutal but with a little finesse you can get it done without a problem. Nobody had ever taken a pair of pliers to their canna plants until I started experimenting with it a few years ago and now it’s a key part of the method.
Thank you Master😁👍 With pliers I gently squeeze an area of the stem or just in one place? I will need to hold with the pliers a steam and with another pliers bend?😁
 
420, sir, I was thinking of moving to tap water too. Mine: 220 PPM, largely calcium. 170 PPM is roughly 0.4 EC. Are you able then to get your flowering EC up to around 2.0? And also increase your EC targets all through the growth cycle by about 0.4 EC?
Sorry @Mongoose! I’m not that technical about it and I try not to go above 1.5EC. My starting EC is .07 and I basically cruise though veg and flower at around 1.3-1.5EC. I do bring it down during mid to late flower from salt build up but I try to keep it around 1.5. To be honest… all you really need it 1.3EC to grow healthy plants with big dense colas.

Thank you 420, I will follow your lead! Have Floralicious in the mix with GH Bloom now, thank you. She is still in pistils, but stacking rapidly, and is happy with 1.5 EC -- no leaf tip burn etc.
 
Thank you Master😁👍 With pliers I gently squeeze an area of the stem or just in one place? I will need to hold with the pliers a steam and with another pliers bend?😁
One pair of pliers is all you need. I use a pair of long nose needle head pliers but any pair of pliers, channel locks, or vise grips will work.
After you schwazz your plant figure out what height you’re going to bend your branches at and what direction they’ll lay, then give the branches a good pinch with the pliers and firmly hold the pressure while slowly working the limb over. I try to supercrop all the branches at the same height but sometimes it’s tough with the different node spacing on each branch.

Sorry @Mongoose! I’m not that technical about it and I try not to go above 1.5EC. My starting EC is .07 and I basically cruise though veg and flower at around 1.3-1.5EC. I do bring it down during mid to late flower from salt build up but I try to keep it around 1.5. To be honest… all you really need it 1.3EC to grow healthy plants with big dense colas.

Thank you 420, I will follow your lead! Have Floralicious in the mix with GH Bloom now, thank you. She is still in pistils, but stacking rapidly, and is happy with 1.5 EC -- no leaf tip burn etc.
Curious to see what she looks like now. :eyebrows:
Please post some pics when you get a chance.
 
One pair of pliers is all you need. I use a pair of long nose needle head pliers but any pair of pliers, channel locks, or vise grips will work.
After you schwazz your plant figure out what height you’re going to bend your branches at and what direction they’ll lay, then give the branches a good pinch with the pliers and firmly hold the pressure while slowly working the limb over. I try to supercrop all the branches at the same height but sometimes it’s tough with the different node spacing on each branch.


Curious to see what she looks like now. :eyebrows:
Please post some pics when you get a chance.
Thank you for the help👊 I still re-read this thread but your handbook would be helpful. You could place a price tag and there would be many buyers. I stopped watching youtube and reading forums when I found out about your grows. Nothing compares to your grows💪🍀💨
 
Quality for sure! The tops looked so good I had to watch the video a few times myself.
Whole different frost level with photos. :mrgreen:
Pls do... for us photo growers to have the chance to hone into your timing for schwazzing and bending. Also to see how you go with 12/12. I believe in ya!
 
Last edited:
Curious to see what she looks like now. :eyebrows:
Please post some pics when you get a chance.

Day 73. She's crankin'. 24" both directions.

EC 1.5. GH: FloraNova Bloom, Floralicious, Diamond Nectar ( 0-1-1 ).

Still wish I'd gotten her flatter, but I'll get all that figured out in future grows. But if she was flatter would need a bigger tent! I'm actually mulling two 32"x32" tents, I think I can make them fit the available space. And will be so much easier with the net, etc.

Aside: I cut 1/4" slabs from a block, and laid them in the drain bin. Loaded with roots. I'm also letting her go DWC, don't know why not. Using air stones, because I have the gear from DWC days. The reservoir water is not green with algae, that's a reflection from her leaves above.

IMG_2884.jpeg



IMG_2888.jpeg
 
Last edited:
Pls do... for us photo growers to have the chance to hone into your timing for schwazzing and bending. Also to see how you go with 12/12. I believe in ya!
just veg them till you think there big enough or your plants fills all the holes as i grow photos and organic too
 
Back
Top