hey AFN iam just about to harvest my first stone dragon, and i really wanna get the drying and curing process done properly this time as my previous attempts i have left them dry out a little too much, so i was doing some research here and online and this is what i came up with, if anyone notices anything i have missed out or could do better then i would appreciate the help :smokebuds:
1. cut and trim buds
2. start drying until dry on outside or stem/branch snaps
3. put in to kilner jars with humidity guage
4. check daily and check humidity
more than 70% still too wet dry for another 12-24 hours
65-70% humidity leave jar open for 2-4 hours until humidity gets under 65% and add 62% humidipak, then leave to cure but keep a close eye on the humidity levels
do you think this sounds good to get the proper cure?
1. cut and trim buds
2. start drying until dry on outside or stem/branch snaps
3. put in to kilner jars with humidity guage
4. check daily and check humidity
more than 70% still too wet dry for another 12-24 hours
65-70% humidity leave jar open for 2-4 hours until humidity gets under 65% and add 62% humidipak, then leave to cure but keep a close eye on the humidity levels
do you think this sounds good to get the proper cure?