Extraction Recommended dabbing rig and enail
- Thread starter lunarman
- Start date
All electronic rigs are chinese-made and they either work or they don't. I've had five and they've all been reliable.
It's the nail that matters. If you don't have a Quality American-made nail or I don't know maybe you want ceramic? That's where you're going to spend some money.
Then there's whatever glassware you want. I prefer to buy American on glassware most of the time. They usually have thicker glass and better balance and wide bases.
It's the nail that matters. If you don't have a Quality American-made nail or I don't know maybe you want ceramic? That's where you're going to spend some money.
Then there's whatever glassware you want. I prefer to buy American on glassware most of the time. They usually have thicker glass and better balance and wide bases.
Hey bud, that's kinda tuff to answer lol. A lot of the rig I feel is personal preference. I got my enail kit on Ebay. Came with everything needed. It is a 2pc quartz 1 is a banger other is like a traditional titanium nail but it quartz. Came with a couple silicone containers and a couple rosin bags think 50 microns. It is the same company that makes my rosin plate kit cant think of name lol. Was 120.00 usd. You have a shit ton of options tho. I would go get a cheap 1 for now if you dont already and just keep looking till you find the 1 for you. I will check the name of where I got my rings, they are in Oregon free shipping great store. They end up sending me 3 because of damages to the 1st 2. All 3 are usable and very solid. I have to admit I like the quartz but i got a titanium nail that i love best. You can always go to the head shops and look, then try to find it cheaper elsewhere I'm sure their inflated on price.
Thanks Mcdee. I am going to look at some rigs on Friday from a local head shop but it will be flame torch based. They don't really like electronic heaters and enails. And it might be lower tech but it will also be lower priced too which is good. And handling the glass in the store will give me a better feel for what I like or don't like which you can't really do buying online.
Ya that why when looking on line I look at dimensions and weight. That will give you a rough estimate of how solid and strong it may be. Mine are not specific to torch or email. They are all just bongs, once you put on a nail or a banger on it's now called a rig. Call them whatever you like lol. I would definitely recommend a torch. Enail I like better, but if it's not on and I'm running out like now then I go to the torch it's faster for 1 or 2 hits for sure bud.
someone today told me that torch is better than enail. Personal preference no doubt. I'm going to try and set setup for enail and a torch nail and compare the two. I already have the temp controller part that is part of my rosin press so I won't buy another one of those unless I find I really like controller heat over torch heat.
I'm still not convinced on the decbarb machine. Or I am not rich enough to order one is more like it. And now that I need to spend a couple of hundred on a rig and be ready for black friday's Meph sale I won't get one for a while yet. Plus, I want to run decarb's at lower temps and control that very specifically and I don't think that decarb machine allows that.
I would think most would disagree with them. Enail is a consistent temp where a torch is going to blast at a much higher temp and then start to fall. You have to wait till the temp comes down and get it before it cools too much. If temps too low it will pool and waste most of it. If too hot you will lose flavor and harder on your throat. Some like high temps, I dont makes me cough more and can do less. My enail is present to 711 but goes to 1000. You cant use your pid from press. 1st it should only go to like 400°f, 2nd unless it matches you enail cord won't fit. Some have 5 pins some have 4 or 6 so they have to match. That's way I bought the same brand for plates and enail. I can use my enail for my press but not the other way cause temp wont get high enough. Check what the max temp yours goes to may need to get both still. Hey I ain't got no money bro, I stay at home with kids. I will let the lift do all the work, it decarbs at the ideal temp and time range so I dont think I would be able to out perform it, nor do i think most people if anyone will. I know that when I put whatever in as long as I dont get to excited and put too much in it will work. Just have to say do I need more seeds or would I like to get a lift this year? I have so may seeds I cant keep the straight so I started to use that for some toys lol. I get like 1 or 2 new things a year. I use my xmass and bday cash. Doesn't cost me a thing really. I started save pop cans and other metal to cash in. Gotta get creative when you ain't got no money hahaha. When in doubt have a bake sale like the Brady Bunch would do lol.
I'm having lots of bake sales these days. And I love it.
If you would like to use a quartz banger heated with a torch and not sure about temperature they make some of these thermochromic ones you can check out. They are priced about $30 for a Chinese version to $250-300 for US made ones.
Nice!
