New Grower Any suggestion on ventilation

[versatyle]

This is my first grow and ill be using coco in 2 3gal pots. My filter is a lil larger than I expected. I have dr60ll pro tent, active 4"inline fan, can 2600 filter, n xtrasun 4 reflector" with universal cooling kit. Any suggestions on how I should run my ducting/venting with this setup?

 

[namvet25]

Welcome to AFN,Hitch.Run a flex duct from a vent in your tent into the light cooler.Than run another flx duct from the other side of the cooler to the filter than either have the blower hooked to the opposite end of the filter than run that to a vent in the tent to the outside.Try and keep the intake and exhaust vents on opposite ends of the tent, and try and keep the filter near the top of the tent.You will need some wire or rope to hold the filter up and some clamps or duct tape to keep all the connections secure. The object is to pull fresh air in,run it through the light and than out the opposite side of your tent.

 

[versatyle]

Feels great to be here and finally get started. Thanks. I have a much better understanding now on how Im going to run this setup and Ill be sure to keep you guys updated once I pop my first 2 autos!!! Thanks again