Grow Mediums Auto Blueberry Dutch Passion 5 Gallon DWC

[DWCocha]

shes stunted from too much too soon im guessing mate. EDIT -Or not enough .If PH is good & res looks nice its it'll be the nute strength ???

Flora Grow: .85 ML
Flora Micro: 1.75 ML
Flora Bloom: .85 ML
Rapid Start: 1.5 ML
Floralicious: .75 ML
Dutch Master Silica: 2 teaspoons
Calimag: 2.5 teaspoons ..................................

Id go ...

Cal/mg ... 1.5 teaspoons (always 1st) ..... let it mix / shake it up
silica .... 1 teaspoon max (5ml) ... strong stuff ,let cal/mg mix well 1st & silica always 2nd.
rapid start ... half - 3 quarters the bottle recommended strength . most important for roots & young/stunted plants.

last your FB 3 part administered as they tell you ?( bloom 1st for the cal / mg probably & may even need to go in before the rapid ?) .... make this upto around 700 PPM ...the totla bucket ( AT A BLIND GUESS THAT WOULD BE 1/4 OF THE 3 PART RANGE YOU HAVE) .

Let everything mix well before adding the next ... balance ph to 5.7 - 7.75 & get plenty of bubbles going . Wait & check PH again ...adjust if needed

She wants low veg nutes & some silica ,plenty of root stim for a week of two & could well pick up ....if shes sexing then get ready to add bloom nutes a week or so later but not yet . ...keep posting full leaf pics of any deff signs as its still hard to tell


hope this helps

 

[beagleandbull]

Actually this is perfect thank you dude. I'm gonna follow your instructions. I was thinking I put way to much calimag and silica in earlier, but I was really stoned when I was in the process of changing the res.

EDIT: I just switched the res again, and currently have everything at the dose you recommended. Thank you. I'll put pics of it up tomorrow morning, and I'll let you know how it's going.

 

[DWCocha]

Actually this is perfect thank you dude. I'm gonna follow your instructions. I was thinking I put way to much calimag and silica in earlier, but I was really stoned when I was in the process of changing the res.

EDIT: I just switched the res again, and currently have everything at the dose you recommended. Thank you. I'll put pics of it up tomorrow morning, and I'll let you know how it's going.

Hope shes picking up for ya mate ?.... I did a typo in the last post & that PH range was meant to read 5.7 - 5.75 (anything just under 5.8 really )Few pics on how she is would be good :smokebuds:

 

[beagleandbull]

Uhm well until about a few hours ago she wasn't looking any worse. Whatever the problem it seems to be slowing down now that I have the new feed going for it. I'm somewhat confused the root growth lately has been quite slow however it is picking up. I got a lot of pictures.



This is the plant I'm watching for a friend till it's done flowering. I water her tomorrow with some nutrients he gave for me. Everything is perfect I can't really fuck it up haha.

 

[beagleandbull]

Just a thought, but could it be that my air pump isn't putting out enough oxygen?

 

[DWCocha]

Just a thought, but could it be that my air pump isn't putting out enough oxygen?

Could very well be the prob dude ?...I use a 30 liter per min pump for 15 liters of nutes ... anything less than 15 liters per min would not be putting enough 02 in the res IMO :smokebuds:

 

[beagleandbull]

So the problem was the air pump I was using. I decided to reuse the air pump that came with gen hydro water farm instead of the one I purchased separately, and that was a big mistake. In the short time I've had the new pump going my roots have gotten bigger. I'll post a picture tomorrow.

EDIT: My friend pointed out that my plant is getting itty bitty pistils so I think it's starting to flower.

 

[DWCocha]

nice 1 bud ...you could put both pumps in there for extra bubbles if you have two :smokebuds:

 

[beagleandbull]

I was going to, but I don't have anymore tubing. I'd buy more, but walmart never has any in stock when I go there.

 

[beagleandbull]

I have a question. Does anyone know how much air my pump needs to be putting out to be the right strength. The aqua culture pump I am using now pushes 1200 cc per minute. Honestly, I don't know what it means by that. If someone could explain this to me I'd appreciate it.