New Grower berry ryder and sour diesel

hey swampman

is this the thread you wanted the cs info on?

it will take me a while to re-write and re-attach all the pics but give me a day and i will get it done for you

:peace:
 
yeah bro i appreciate all of it ....u dont have to do the pictures and all i have that saved to ebay ....just a few notes i shoulda wrote this all down lastnight before tha Mishap sorry bro for what happened ....
 
dont worry bro it cool

right here goes

I will now give you step by step instructions on how to make a colloidal silver generator and how to produce the silver itself

first you will need the components:

1. a multimeter ( got mine off ebay for £2 ) this is to measure the current passing throught the water
$T2eC16J,!wsE9suw)ypCBP+UqUqrww~~60_12.jpg
2. a 33Kohm 0.25W resistor ( from any good electronics supplier for pennies )
!B+kkN-wBWk~$(KGrHqMOKpQEy+jC46+JBN!Cm!inB!~~_12.jpg
3. 4 9v batteries ( got them for £2 at the supermarket )
9v-battery.jpg
4. pure silver not jewlelry it has to be 99.99% pure (got pure silver wire from ebay £3 )
$(KGrHqF,!hkE1f1qrqD4BNj3uNElKg~~_1.jpg
5. pure water the purer the better (NOT TAP WATER!!)distilled

6. 3 double ended crocodile clips
$(KGrHqR,!lYE65OIvfE7BOzqf+w!rw~~60_1.jpg

Now to assemble the generator

1. connect all 4 batteries together creating a 36v power supply

2. wrap one end of the resistor to each of the prongs from the multimeter

3. connecting the clips
a. connect the first clip from the battery to one prong on the multimeter

b. connect the second clip from the other prong on the multimeter to some of the silver wire

c. connect the third clip from the other pole on the battery (either+or-) to some more silver wire

4. turn the multimeter on and touch the silver wire together to test. it should say 36v

5. now place the silver wire into the pure water on opposite sides of the container, making sure the clips do not touch the water only the silver(ruins the solution)

here is a diagram of how its connected

silver generator.jpgTIP: use a clean glass container to make the colloidal silver in, as glass is inert and will not affectthe solution

now you should see the voltage is lower than 36v this is normal as the water is not as conductive yet. as time pass es the voltage will rise.

leave this to work for about 8 hours the water will yellow slightly as soon as you see this stop the generator its done!

To effectively use this solution spray female plants once daily (drenching) starting as soon as they show pistills. within two weeks you will see male heads start to form, when this happens stop using the colloidal silver and return to normal growing strategies.

you should have viable fem pollen after 4 weeks of stopping the spraying
as per timeline below

week 1 plant germs

week 3 pistills appear and spraying with colloidal silver starts

week 5 male heads developing spraying stops

week 8-9 Fem pollen released

i hope this helps you out brother:peace:
 
thanks again bro ......I Havent seen anyone from Barneys Farm here so i cant ask proper permission ....and i like the strain ....not to mention that I wanna do my own science and have everyone has done this .....Im not making a million for profit i really only need a couple to keep her around ,,,.....:smokebuds::booya:
 
ok so This is further a Berry ryder Thread all SDs are toasted into making butter ......figure they will help a lil but not totally sure .....Little cheese above dirt ....shes going into her only home no tier just dirt 1/2 gal ,,,,,,gonna see how this goes >>>>>NEw Thread Better Dirt quality bean .....Lets see whats up with Swampmans new concoction....
 
oh Yeah Got A lil job its about time ......Ya for money ........
 
Hey swampmam just so ya kno when ya spray a plant with colloidal silver ya can't smoke it. It's poison. So just keep that in mind if ya want to make female seed.
 
Back
Top