Indoor Blackout "SpaceBucket" first grow

[ParceraoGrower]

Thank you for the tip dude, but my problem is not germinating.. now that i have a thermometer i know that the temps are too high(about 34º Celsius).
that is why my first seed died..
today i took off a lamp and put one more outtake fan.

here is my new seed ready to go to soil


this one is to you guys see the 3 fans

i might still have heat problems.. lets see...cheers

Put it between two paper towels....

Just look in my signature. Click the GreenPoison link and you can follow that.


Cheers bro

 

[Eyes on Fire]

Hey man.Sorry yer seeds died man.glad yer getting another one in the dirt.

Usually one cfl witth a fan(or some bit of air circulation,not dead air) on low will do fine.I just went back and read that you had your fan off.maaaan,I totally missed that.sorry bout that buddy.thats truly my fault yer seed died then.it just baked away.always have moving air to one degree or another and about 80F with a nice damp soil,you cannot miss dude.promise.lower the temp a few degrees as the first set of leaves come with a starter feeding.for autos anywho.adjust your air accordingly to your temps,yet beware of windburn.and you should be golden in no time buddy.booom,yer off n running pal.take it easy man.and again Im truly sorry,I missed that small detail.my bad dude,truly.:Sharing One:

 

[ParceraoGrower]

Relax bro, in no way it could be your fault.. your helping me alot and i cant thank you enough!
man it is hot as hell in my town so i'm having a hard time to take my temps down..and my fans are wired together for these reasons im running 3 fans.
look at my temp with 3 fans and 1 23w cfl running at night! :no::no:

Hey man.Sorry yer seeds died man.glad yer getting another one in the dirt.

Usually one cfl witth a fan(or some bit of air circulation,not dead air) on low will do fine.I just went back and read that you had your fan off.maaaan,I totally missed that.sorry bout that buddy.thats truly my fault yer seed died then.it just baked away.always have moving air to one degree or another and about 80F with a nice damp soil,you cannot miss dude.promise.lower the temp a few degrees as the first set of leaves come with a starter feeding.for autos anywho.adjust your air accordingly to your temps,yet beware of windburn.and you should be golden in no time buddy.booom,yer off n running pal.take it easy man.and again Im truly sorry,I missed that small detail.my bad dude,truly.:Sharing One:

 

[ParceraoGrower]

i've also made 2 holes like that to dissipate the heat from the bulb..i think when it comes to 4 lamps it will help alot.

 

[Eyes on Fire]

Hey man!ya its just a small detial I missed n it may have lead to it in my mind.cool man.

I couldnt open the pics man but if your having issues with Heat,run a bit of C02 and hit the pre watering with a light bit of Silica next time.those will help keep your sprouts and wee ones a bit hardier during stress points man.or water it in with silica if they are past the first set of leaves poppin out with a very light mix with your starter feeding.

Hope that'll push ya past your stresses man.happy growing man.jus careful of windburn.

- - - Updated - - -

brb in a few.Explosed electronics that are altered could(prolly wont unless RH is way up) lead to slight deposit buildups and cause short,eddy currents n so on. just keep a smell out for HOT or burning electronics.Its a very distinct smell.shut it down and replace if you run into issues witth that.

ya really need to PULL tha air out in such a smaler space if ya can.

 

[ParceraoGrower]

Heyy!!everythings good?? i hope so..
never heard about watering with silica but will give it a try when i find it
i've not wasted time man
look my yeast c02 system


guess who showed up!!


got it. i'll keep an eye for burning eletronics

peace bro:grat:

Hey man!ya its just a small detial I missed n it may have lead to it in my mind.cool man.

I couldnt open the pics man but if your having issues with Heat,run a bit of C02 and hit the pre watering with a light bit of Silica next time.those will help keep your sprouts and wee ones a bit hardier during stress points man.or water it in with silica if they are past the first set of leaves poppin out with a very light mix with your starter feeding.

Hope that'll push ya past your stresses man.happy growing man.jus careful of windburn.

- - - Updated - - -

brb in a few.Explosed electronics that are altered could(prolly wont unless RH is way up) lead to slight deposit buildups and cause short,eddy currents n so on. just keep a smell out for HOT or burning electronics.Its a very distinct smell.shut it down and replace if you run into issues witth that.

ya really need to PULL tha air out in such a smaler space if ya can.

 

[starass]

Looks good!!!! Soil looks a little dry!!! Maybe do some foliar feedings? Keep the moisture up while it is a seedling.
Grow for the gold
Starass

 

[Eyes on Fire]

AWESOME buddy!!ya man,just add small sips of water and veeery veery light starter dose sized silica portions.For example if it say 5mls per gallon of water,just use 1 - 1.5 or maaybe 2.just give her a small taste of the silica water when you give her sips (small spray bottles work awesome at the base of the sprout)1 or 2 light sprays a few times a day.small sprays a the base,with water throughout the day n she'll be taking off before ya know it bro.Awesome ye gott her wee one up!!BOOM!!its on now man.lets get that buckett filled with some buds.LOL!

edit:make sure your using PH'd water/Bottled/dist. or RO water

 

[ParceraoGrower]

so...
silica is on the way!
ive ordered rhino skin online and its about to arrive.

some pics :
She's beautiful !!:clap::clap:
Day 2

Day 6


i've made a 6mm glass heat shield , separating the plant and the bulbs.
it helps me alot keeping my temps down and my humidity no longer drops fast(its around 60-70% now).


im using a small aquarium air pump to oxygenate my water.
before i turn the pump on my ph is around 6.3 , after some hours in with the pump on it goes up to 7.3
should i keep with the bubbles??

 

[Eyes on Fire]

Hey dude.They look all kinds of sex man!!Nice n health,eautiful job. Keep bubblin your water,it provides a bit more O2 to your root zone and makes it more active.You can(should rather) invest in a very inexpensive General hydroponics (or similar brand)PH up n down kit. out 15 bucks and will last you for maaaany maaaany grows to come.Excellent deal.

Awesome idea bout the glass shield too.Ill rep you when I can.Im on a loaner Laptop,Mines all hosed up atm.LOL!suuucks!!But te RH is good atm but when it starts to blow up with the first set of leaves,you'll want to try and dial it back slowly over a week or two to around 40% is safe till you start to flower.then a safe bet it around 20-30% with airflow.always airflow.you will (in time) want to maybe remove the glass shield,but not 100% on that.great idea too.Not familar with rhino skin but if its a silica additive Im sure it'll be fine.Just remember starter feeding strength till your first set of leaves are a poppin up.Ill pop back when I can in about a week or sooner If I can.But you should be all kinds of awesome for weeks to come bro with what your doing man!!+rep!!

you can stop bubblin your water if PH is an issue.but once you have your PH kit,its a great idea to invest in a PH meter(40-60 bucks is a good meter,Hanna or sumthin similar)you can get em really cheap just keep em calibrated cuz they fade(usually high) towards one end. then you should bubble yur water everytime.other than that brother your frigin spot on man.heres to you growing a kick ass plant buddy.ill talk attcha soon.