Lighting Checking my math.... and driver selection

[Arthur]

So I'm going to build a 6 cob light, 6 x citizen clu048-1812 3500k, running @ 52v and 1050ma in series.

This is the driver I'm looking @

HLG-320H-C1050B

By my math I need 312V (6 x 52v = 312v)

Yes? No? I've been struggling with coming up to speed on the tech, but I think I'm getting my head around it?

 

[BigSm0]

So I'm going to build a 6 cob light, 6 x citizen clu048-1812 3500k, running @ 52v and 1050ma in series.

This is the driver I'm looking @

HLG-320H-C1050B

By my math I need 312V (6 x 52v = 312v)

Yes? No? I've been struggling with coming up to speed on the tech, but I think I'm getting my head around it?

The voltage for most cob holders are between 150-250 volts max. You would be better/safer with 2 drivers vs 1. 2-hlg-185-1050

 

[Arthur]

The voltage for most cob holders are between 150-250 volts max. You would be better/safer with 2 drivers vs 1. 2-hlg-185-1050

Thank you sir, I will give them a look....

I thought the trip up the mountain to speak to the guru was supposed to be a long and arduous one?