Hey guys, so in a random turn of events the dust has settled which has given me the green light to get under way with my next project, so I thought I'd give you a run down of the equipment available to me and my plans so far.. I have a few queries and concerns as I have to make use of what is around!
The plan as it stands is to move into my larger tent which I'm going to assemble tomorrow morning and grow out my two remaining BAM seeds together.
Tent space - 160x160x200cm This is double the width and length of my current set up with an extra 40cm of head room.
Medium - This will be another DWC grow identical to my last attempt so I need to order another 30lpm air pump (I have access to 3 or 4 small air pumps until the big one arrives if there is any delay over the xmas period) Buckets are the same 20L oxypots you've seen everyone using.
Fans - I have a second extraction fan the same as my original one, just without temp controls, and a second carbon filter if my one doesn't do the job. Shouldn't be a problem.. I have other standard room fans for extra circulation if needed or for cooling the air pumps. I'm hoping to get hold of a second hand fridge as well to control the res temps but I think I will be fine over the winter for a short while at least.
Nutes - I'll be using the Canna range as I did the first time around. At some point I'll need to order some more ingredients for bennie tea but while the temps are cool we should be cool.
Lights - this is where I'm having a few concerns. In the near future and hopefully before the grow is over I will be able to afford upgrades for my ms006 modules but until then my plan is to start them off under one 006, veg them under one unit each and then in flower, (if I havent upgraded the leds) I have access to a 600w HPS which I could add into the mix for extra flower power. What do you guys think about that lighting arrangement? What would be the best option as far as hanging the lights goes? I was thinking since they would have an ms006 above each of them during veg, I could position the HPS in the middle slightly higher than the LEDs..
One more little question, I have access to both rockwool and root riot cubes so if anyone has a preference and why then hit me up
All comments/advice/input will surely be greatly appreciated, can't wait to hear what you guys think!
Right that's all I can think of for now as I've not had much time to ponder, I thought it would be a few months before I got started again..Let the fun begin
The plan as it stands is to move into my larger tent which I'm going to assemble tomorrow morning and grow out my two remaining BAM seeds together.

Tent space - 160x160x200cm This is double the width and length of my current set up with an extra 40cm of head room.
Medium - This will be another DWC grow identical to my last attempt so I need to order another 30lpm air pump (I have access to 3 or 4 small air pumps until the big one arrives if there is any delay over the xmas period) Buckets are the same 20L oxypots you've seen everyone using.
Fans - I have a second extraction fan the same as my original one, just without temp controls, and a second carbon filter if my one doesn't do the job. Shouldn't be a problem.. I have other standard room fans for extra circulation if needed or for cooling the air pumps. I'm hoping to get hold of a second hand fridge as well to control the res temps but I think I will be fine over the winter for a short while at least.
Nutes - I'll be using the Canna range as I did the first time around. At some point I'll need to order some more ingredients for bennie tea but while the temps are cool we should be cool.
Lights - this is where I'm having a few concerns. In the near future and hopefully before the grow is over I will be able to afford upgrades for my ms006 modules but until then my plan is to start them off under one 006, veg them under one unit each and then in flower, (if I havent upgraded the leds) I have access to a 600w HPS which I could add into the mix for extra flower power. What do you guys think about that lighting arrangement? What would be the best option as far as hanging the lights goes? I was thinking since they would have an ms006 above each of them during veg, I could position the HPS in the middle slightly higher than the LEDs..
One more little question, I have access to both rockwool and root riot cubes so if anyone has a preference and why then hit me up
All comments/advice/input will surely be greatly appreciated, can't wait to hear what you guys think!

Right that's all I can think of for now as I've not had much time to ponder, I thought it would be a few months before I got started again..Let the fun begin
