Extraction Magic Butter Machine

[Builder0101]

So when I found out you can do alcohol extraction with the machine I bought one.
I added the plant material and alcohol. Whan I poured the material out of the machine all except about a teaspoon of material passed through the fine mesh bag. I plan on combining the concentrate with coconut cannaoil I've already made. This will be the base for gummies. I'm thinking about getting a finer mesh to get some more of the fine material out. I am not sure what the micron size of the mesh bag that comes with the machine is but it is very fine.

Any suggestions?

 

[Prez2.0]

Wish I could be more help been eyeing one of those machines for a bit but haven't pulled trigger. Good luck with gummies

 

[Simplicio]

Let gravity do most of the work.
Pour the mixture out of MBM, and into a tall narrow container, let it settle about 30 min, then carefully pour out the clear fluid thru a coffee filter.
As soon as you see brownish material starting to flow out of the container, stop and let mixture settle again.
Not allowing the material to clog the strainer is important.
If you want to get everything, you can put the strained-out material back into MBM with more alcohol for a second run.
Or just do it by hand with a smaller amount of alcohol.

 

[Builder0101]

Let gravity do most of the work.
Pour the mixture out of MBM, and into a tall narrow container, let it settle about 30 min, then carefully pour out the clear fluid thru a coffee filter.
As soon as you see brownish material starting to flow out of the container, stop and let mixture settle again.
Not allowing the material to clog the strainer is important.
If you want to get everything, you can put the strained-out material back into MBM with more alcohol for a second run.
Or just do it by hand with a smaller amount of alcohol.

Kinda what I was thinking thanks