Lighting new GN Units

[Dr Fluff]

Above, The Holographic Series 1 LED Grow Light. Built with the best technology LEDs, cooling technology, drivers and optics. There is nothing else like it.
Below. The small compact interior of the Holographic Series 1. The SynJet silent cooling module replaces old-fashioned cooling fans. The Philips Xitanium digital driver ensures intelligent and controllable power.

Our goal was not to compete with the low-end LED manufacturers, there are already enough of them. Our goal is to offer a high-end premium quality alternative to them. You will be able to find lower cost LED grow lights, but we don’t believe that you will find an LED grow light built to the same quality standards with the same quality components, efficiency and safety features.

Here is some more information on our new LED grow light.

LED Module. The LED module is the heart of the grow light and we used the brightest, most powerful LEDs, the Philips Rebel LEDs. We use a blend of blue, red, warm white and cool white LEDs, on average they convert 43%+ of their light directly into electricity. Because we use such powerful LEDs we need fewer of them allowing the grow light to be small.

Above and below. The LED module uses 36 ultra-bright Philips Luxeon Rebel LED's each fitted with a high quality LEDIL secondary optic. The central LED is a specialist Infra Red chip. The LED module is machine soldered in Europe and has a 2mm copper core to aid heat distribution,

LED Driver. We use the Philips 2015 Titanium driver. The new Digital drivers combines intelligent data handling and smooth, precise drive. Unlike traditional AC/DC LED drivers, digital drivers can diagnose, adjust and automate the entire LED system. If your grow room temperature rises beyond a safe limit the driver will dim the LEDs to prevent overheating and to prevent damage to the LED module.

Cooling. Traditional cooling fans make way for the Nuventix Synjet, a revolutionary active cooling solution that produces turbulent jets of air across the heatsink. Using a frictionless oscillating magnetic diaphragm. The Synjet delivers near-silent cooling and a 200,000 hour lifespan. So not only is this superior to traditional cooling fans, it is also far more reliable and keeps your grow room whisper quiet

Above, The high-tech Holographic Optical Diffuser is the final part of the optical system, mixing the colours and creating an even-intensity light field. The Holographic Diffuser comes in a magnetic holder and has a moisture proof gasket to protect the LED module behind. The Holographic diffusers will come in a range of beam angles and take seconds to swap.

Optics. The Holographic Series LED Growlight was named after the innovative new optical system. The multi stage optical system uses high optical transmission materials including a specially engineered micro structure optic (a Holographic Diffuser) which maintains light in a specific beam angle whilst producing a highly homogeneous spread of light. The optical system can be quickly and easily interchanged allowing you to adjust the beam angle to deliver the correct light intensity or spread requirement at any height.

Our Holographic Series LED grow light draws 75W of power and produces similar results to our former HighLite 6-module LED grow light, it will replace a 250W HPS. One of the benefits of LED over HPS is the ability to reduce power consumption and heat generation in the grow room. The use of the latest high power and high efficiency LED means that the initial purchase cost is offset by the reduced running costs. Our LED grow light should offer 50,000+ hours of use, and even after that point the LED grow light should still have around 90% of its initial brightness. Unlike HPS lights there is no need to buy replacement bulbs or separate ballasts.

Above and below. The LED is currently supplied with EU or UK power cables. The electrical connectivity system is from Winsta-Wago, an established safety/quality leader and are made in Germany. The Winsta Wago Distribution box allows up to 6 LED modules to be connected and powered via a single electrical socket. Multiple LED grow lights can also be connected to each other using 'daisy chain' cables if preferred.

We focussed on designing a top quality grow light built from the best components, A single Holographic Series 1 LED grow light is suitable for small/medium grow areas. For larger areas several of our LED lights can be daisy-chained together and can be powered from a single electrical connection. Two of our LED grow lights will be ideal for a 1.2m x 1.2m grow tent, they will produce very little heat and use just 150W.

Above. The back of the LED grow light. The large white socket is for a mains power cable, the blue socket allows fast daisy-chain connections between multiple lights. Small hanging hooks are present in each corner

 

[caks]

a question one is good for 90X90 cm large hight 180 cm growbox? or better two?
thanks

 

[TaNg]

a question one is good for 90*90 growbox? or better two?

I think one will do the job but 2 would be awesome for bloom.

 

[gone1]

a question one is good for 90X90 cm large hight 180 cm growbox? or better two?
thanks

I have to go with Tang there, one would be too little light for that. Even with super efficient LED.

 

[TaNg]

I have to go with Tang there, one would be too little light for that. Even with super efficient LED.

1 will be enough bro if you want to grow efficiently say 4 plants in 6L pots,I think you could get 50-75g per Plant if grown well however maybe an advanced grower could utilise using 2 in bloom with a curved scrog.

 

[gone1]

1 will be enough bro if you want to grow efficiently say 4 plants in 6L pots,I think you could get 50-75g per Plant if grown well however maybe an advanced grower could utilise using 2 in bloom with a curved scrog.

Really? 50-75g per plant that would mean 200g at least, with just only 75w.
That would be 2,7g per watt. If thats the case im going to buy one of these lights xD

 

[TaNg]

Really? 50-75g per plant that would mean 200g at least, with just only 75w.
That would be 2,7g per watt. If thats the case im going to buy one of these lights xD

For sure bro I've been flowering my 2 Mephistos under 2 along side veging 2 DPs. I'm sure if I had 4 plants in bloom I could get 500-600g from the 150w, here are the plants today with the flowering plants at day 55 and the youngsters day 16.

 

[gone1]

Okay fair enough but that arent 4 flowering plants, i ment if you start 4 plants at once you wont get that yeild.

Edit:
With what did you grow your Mephistos before?

 

[TaNg]

Okay fair enough but that arent 4 flowering plants, i ment if you start 4 plants at once you wont get that yeild.

Edit:
With what did you grow your Mephistos before?

No there are only two flowering plants but the lights are hung in the middle of the room so if there were say 4 Chemdogging in there I would get the yeilds I state. The Mephstos were vegged under a MS0006 hybrid. The beauty of the grow in this room is we get to see how they perform in bloom and veg at the same time to get the results im seeing at the moment I would need a MS0004 over each Mephisto and another for veging the DPs so I'm very confident these lights are very powerful for the small amount of energy they use.

 

[Grim Reefer]

GrowNortherns power link cable accessories went on sale this morning. They were kind enough to refund my shipping on my order as i wanted to purchase the wago cable and T connector when the lights originally went on sale. Big thumbs up to Grow Northern. My new multiple auto grows with the HS1 will be ready to go at the end of the week, im really excited.