sir grow alot
No Till Freak
right on!!! please do share!!
- - - Updated - - -
right on!!! please do share!!
Sir grow alot-high brix-aak, br, ape in/outdoor
- Thread starter sir grow alot
- Start date
right on!!! please do share!!
- - - Updated - - -
right on!!! please do share!!
sir grow alot
No Till Freak
Auto Ak #1
blew up and put on some serious stretch, grew over 1.5" in a day right into the light and got some burn on the top cola and leaves but will recover quick im sure, gonna get some brix spraying going on tonight..
Auto AK #2
has a little burned tips i fed with a light energy drench and she didnt like it to much, autos ive grown typically are finicky so ill spray with the foliars and go with water only for the nxt couple waterings and take it from there, let her tell me what she needs.
BERRY RYDER #1
doing very nice and growing like a champ, i am very much enjoying these in the high brix mix, they are growing them selves right now. this pheno out of the 2 BR is a more vigorous taller sativa dom plant. going to be getting a CAT drench on the next feeding here real soon. sprayed with brix tonight.
BERRY RYDER #2
growing well, just a smaller more indica pheno of the 2 and flowering slower. looks great though
im finishing up my outdoor area this week and plan to have them outside by this next weekend
also got in my Colloidal silver in today and will start spraying on the berry ryder #2 tonight. with hopes of pollenating a couple lower branches of my BR#1 for some stock and in turn going to pollenate the auto ak for a berry ryder x auto ak....
also just ordered WOS afghan kush ryder and 60 day wonder from delicious to make seed stock out of.
blew up and put on some serious stretch, grew over 1.5" in a day right into the light and got some burn on the top cola and leaves but will recover quick im sure, gonna get some brix spraying going on tonight..
Auto AK #2
has a little burned tips i fed with a light energy drench and she didnt like it to much, autos ive grown typically are finicky so ill spray with the foliars and go with water only for the nxt couple waterings and take it from there, let her tell me what she needs.
BERRY RYDER #1
doing very nice and growing like a champ, i am very much enjoying these in the high brix mix, they are growing them selves right now. this pheno out of the 2 BR is a more vigorous taller sativa dom plant. going to be getting a CAT drench on the next feeding here real soon. sprayed with brix tonight.
BERRY RYDER #2
growing well, just a smaller more indica pheno of the 2 and flowering slower. looks great though
im finishing up my outdoor area this week and plan to have them outside by this next weekend
also got in my Colloidal silver in today and will start spraying on the berry ryder #2 tonight. with hopes of pollenating a couple lower branches of my BR#1 for some stock and in turn going to pollenate the auto ak for a berry ryder x auto ak....
also just ordered WOS afghan kush ryder and 60 day wonder from delicious to make seed stock out of.
Attachments
sir grow alot
No Till Freak
MONDAY UPDATES:
auto ak #1 is a stretch machine and i believe shes done with it and on to focusing more on flower set.
Fed cat drench 4-5-14
auto ak #2 is flowering for 3 days now and starting to stretch...hoping she is a little shorter than ak #1.
watered 4-6-14
berry ryder #1 done stretching and focusing on flowers now and looking lovely. i really like how she looks and growing.
Fed Cat drench 4-5-14
Berry ryder #2 is now my Colloidal Silver project
the flower sites are all brown pistils now and the leaves are starting to shrivel and look like they are trying to make some changes. ill post updates of her tomorrow
i got my silver wire in the mail today and will be making my own CS today as welll...ill post updates
auto ak #1 is a stretch machine and i believe shes done with it and on to focusing more on flower set.
Fed cat drench 4-5-14
auto ak #2 is flowering for 3 days now and starting to stretch...hoping she is a little shorter than ak #1.
watered 4-6-14
berry ryder #1 done stretching and focusing on flowers now and looking lovely. i really like how she looks and growing.
Fed Cat drench 4-5-14
Berry ryder #2 is now my Colloidal Silver project
the flower sites are all brown pistils now and the leaves are starting to shrivel and look like they are trying to make some changes. ill post updates of her tomorrow
i got my silver wire in the mail today and will be making my own CS today as welll...ill post updates
Attachments
sir grow alot
No Till Freak
DIY making Colloidal Silver
ALRIGHT ALRIGHT back for a update that has me excited.....very simplistically made my own colloidal silver . Learned from a fella on another forum...Thanks B.I.D. for the info
Materials needed:
-Distilled water (must be distilled)=$.88
-9v batteries x3=$7
-4 alligator clips (local hardware store)=$3
-wire(free had some speaker wire laying around)=$0
-silver wire 99.9%(i went over board and bought 10ft which will last a LONGGG TIME)=$20
-light proof glass jar(i used mason jar wrapped in foil and duct tape)=$~2
total cost= $32.88
steps needed:
1. cut silver to length...in my case i bought silver wire that was much thinner than i anticipated so i rolled some extra wire up at the end of each wire length to ensure enough silver in contact with the water...no idea if this is common practice and or right or wrong.
2. have non conductive piece of material, in my case i broke off a piece of one of my bamboo stake, to use to suspend the silver into the distilled water.
3. have your speaker wire cut to length and alligator clips crimped onto each side...red with red black with black
..just in case lol
4. boil distilled water, the amount needed to fill your jar....i found that my water evaporated sort of quick right at first and i had to top off with some more distilled water so you may wanna boil just a little bit extra than needed for this purpose.
5. be sure to run hot/warm water in your jar before adding the hot water to ensure you don't explode the jar with a drastic temp change.
6. fill the jar with boiling water
7. put bamboo over top and suspend silver wire into water, ensure the wires don't touch each other or the sides of the jar.
8. connect the 9v batteries, take one batery in your and and connect one of the other batteries to it....big side into little side and then the 3rd battery same thing on the opposite side of the battery in your hand. (see pics if i just confused the shit of you)
9. connect red alligator clip to the positive side of the exposed battery terminal and the black to the opposite side or the negative side.
10. connect other end of alligator clips to the silver wires suspended in the water.
11. check ppm of water every hour till you reach the desired ppm of 30-50 for making fem pollen.
some other notes....
check starting ppm of the water with the silver in the water to have your starting refrence point.
for me it was at 10 ppm so i waited till it hit 50ppm this way i knew i had 40ppm CS.
It took mine 2 hours and 20min
If i forgot anything ill add it back later...any Q's just ask!!
ALRIGHT ALRIGHT back for a update that has me excited.....very simplistically made my own colloidal silver . Learned from a fella on another forum...Thanks B.I.D. for the info
Materials needed:
-Distilled water (must be distilled)=$.88
-9v batteries x3=$7
-4 alligator clips (local hardware store)=$3
-wire(free had some speaker wire laying around)=$0
-silver wire 99.9%(i went over board and bought 10ft which will last a LONGGG TIME)=$20
-light proof glass jar(i used mason jar wrapped in foil and duct tape)=$~2
total cost= $32.88
steps needed:
1. cut silver to length...in my case i bought silver wire that was much thinner than i anticipated so i rolled some extra wire up at the end of each wire length to ensure enough silver in contact with the water...no idea if this is common practice and or right or wrong.
2. have non conductive piece of material, in my case i broke off a piece of one of my bamboo stake, to use to suspend the silver into the distilled water.
3. have your speaker wire cut to length and alligator clips crimped onto each side...red with red black with black
..just in case lol4. boil distilled water, the amount needed to fill your jar....i found that my water evaporated sort of quick right at first and i had to top off with some more distilled water so you may wanna boil just a little bit extra than needed for this purpose.
5. be sure to run hot/warm water in your jar before adding the hot water to ensure you don't explode the jar with a drastic temp change.
6. fill the jar with boiling water
7. put bamboo over top and suspend silver wire into water, ensure the wires don't touch each other or the sides of the jar.
8. connect the 9v batteries, take one batery in your and and connect one of the other batteries to it....big side into little side and then the 3rd battery same thing on the opposite side of the battery in your hand. (see pics if i just confused the shit of you)
9. connect red alligator clip to the positive side of the exposed battery terminal and the black to the opposite side or the negative side.
10. connect other end of alligator clips to the silver wires suspended in the water.
11. check ppm of water every hour till you reach the desired ppm of 30-50 for making fem pollen.
some other notes....
check starting ppm of the water with the silver in the water to have your starting refrence point.
for me it was at 10 ppm so i waited till it hit 50ppm this way i knew i had 40ppm CS.
It took mine 2 hours and 20min
If i forgot anything ill add it back later...any Q's just ask!!
Attachments
Similar threads
