Auto Gorilla OG Day 52 SHE'S A MONSTER!

IMG_20191226_124915067[1].jpg
Today's report
Auto Gorilla OG Day 52
High Temp 81
Average temp is 75
Low temp 68
High RH 58%
Average Rh is 48%
Low RH 35%
Nutrients- ph'd down to 5.58
2.5 ml of silica, 5 ml of house and garden coco part A & B, 2ml Liquid Kool Bloom, 5ml of diamond nectar, 2ml of hydroguard, .6ml mammoth P, 1/8th tsp yucca powder.
(all per gallon).
PPM 729 .
EC 1453

This plant has gone crazy!:woohoo1::woohoo1::woohoo1:

Since my last update Auto gorilla OG has completely taken over my 3'x3'x5'4'' tent. I couldn't be happier with the results. Because I feel that I have finally dialed in my skills and found a technique that works for me, I decided to purchase two more 3500k cobs from @cobshop.net. I also purchased a new 5'x5'x6'8'' inch tent because I need the space. I will use my small tent to start seedlings while flowering in the other to harvest more often. I chose not to defoliate this plant because I plan to defoliate the next run so that I can compare and contrast bud quality and results. I've heard mixed reviews of both ways, I figure why not see for myself. My tent will be here on Saturday, hopefully my lights will arrive soon. This plant has gone crazy under 2 cobs, I wonder what she will do under 4. :woohoo1:

IMG_20191226_124915067[1].jpg:drool:
IMG_20191226_124841076[1].jpg
IMG_20191224_091330361[1].jpg



Today's report
Auto Gorilla OG Day 40
High Temp 81
Average temp is 75
Low temp 68
High RH 58%
Average Rh is 55%
Low RH 38%
Nutrients- ph'd down to 5.58
2.5 ml of silica, 4 ml of house and garden coco part A & B, 2ml Liquid Kool Bloom, 5ml of diamond nectar, 2ml of hydroguard, 1/8th tsp yucca powder.
(all per gallon).
PPM 729 .
EC 1453

Auto Gorilla continues to exceed my expectations. I did not consider that this plant is sitting under 2 auto cobs and doesn't have any other plants to compete with. she is quickly getting out of control. There is now more space to train her. I don't know what to do. :shrug:
the only solution I can think of to optimize on the full potential of this awesome pheno is to give her more light and more space. I will have to spring for more cobs and a bigger tent soon. I've never had my shit dialed in to the point where the plant growing to big was a problem. Guess it's time to upgrade.
IMG_20191218_095630859[1].jpg
IMG_20191218_095617160[1].jpg
IMG_20191218_095532474[1].jpg



Today's report
Auto Gorilla OG Day 33
Killer Kush Day 25
High temp - 81
Low temp - 71
High RH - 62%
Low RH - 40%
Avg. RH has been about 51%
Nutrients- ph'd down to 5.58.
2.5 ml of silica, 6 ml of house and garden part coco A & B, 1ml Liquid Kool Bloom,
1 ml of rapid start (all per gallon).
810 ppm.

I made some changes and have a few significant details to note, so I figured it would be a good time to update my journal. I think that I may continue to do weekly updates on Sunday going forward unless something significant happens.

I noticed a little clawing on Friday as well as leaf edges curling up just slightly. I believe that there could be a few issues going on. 1. Too much Nitrogen, 2. Lights too close, 3. low humidity, 4. Algae growing on the outside of the smart pots.

1.To rectify the clawing situation, I changed out my reservoir because I was afraid of nutrient burn, developing nitrogen toxicity or a potential nutrient lock out. I added a lower amount of the base nutrients, but added liquid Kool bloom to the res. At day 30, Auto Gorilla is showing some signs of flowering so I figure it can't hurt to increase to P and k while simultaneously lowering nitrogen slightly. Seems like perfect timing.
IMG_20191208_231039955.jpgIMG_20191208_112140839.jpg

2. I moved the lights slightly away from the plants to reduce the intensity a bit.

3. I increased the RH is the tent to about 50 %.

4. I have no solution for the algae. I have red that anything that gets rid of it can hurt the plants. I don't think it's causing any harm. Plants seem happy. I've increased the airflow on the pots themselves.

Slight tacoing has since gone away and leaf curling has subsided.

Killer Kush F1 is still looking stunted, but she is really thick and starting to stretch a bit. I think I will finish her because she has a ton of character. Maybe she will finish out with really thick colas. We shall see.

I defoliated auto Gorilla OG and adjusted my pipe cleaners to continue low stress training Auto Gorilla OG. She is taking to it very well. The bud sights on the bottom have become larger than the top bud sights. I think the canopy will be nice and even.

auto Gorilla OG day 33
IMG_20191208_231113961.jpg
IMG_20191208_231109148.jpg
IMG_20191208_231139790.jpg
IMG_20191208_230347139.jpg
IMG_20191208_230321451.jpg

Killer Kush day 25
IMG_20191208_230417300.jpg
IMG_20191208_230404470.jpg
IMG_20191208_230359805.jpg

Today's report
Auto Gorilla OG Day 30
Killer Kush Day 22
High temp - 81
Low temp - 72
High RH - 72%
Low RH - 35%
Avg. RH has been about 50%
Nutrients- 1 tsp of recharge for both plants ph'd down to 5.57. After 6 hours of dark plants received first feed of new reservoir. 2.5 ml of silica, 6.5 ml of part A & B, 1 ml of rapid start per gallon, ph 5.52.

Seeing decent growth from both plants. Auto Gorilla has taken to LST really well. Bud sights are all even and at about the same height. Both plants have also been tolerating the nutrients well.

I am noticing weird behavior from the Killer Kush. She is extremely squatted. She hasn't shown any signs of light stress, or overfeeding. She has really good color and huge fan leaves but she isn't developing tops very well. I've tried to low stress train her but the tops that she is producing have practically no stretch. I'm not sure what to do with her. Since she's a photo I don't know if she will be worth the extra two months it will take to finish her.

Bad pheno maybe???

Auto Gorilla Day 30
IMG_20191204_090251893.jpg
IMG_20191204_090202260.jpg
day 30 3.jpg


Weird ass KIller Kush photo
day 22.jpg
day 22 02.jpg

day 22 03.jpg
dsy 22 5.jpg
day 22 04.jpg

Today's report
11/26/19
Auto Gorilla OG Day 23
Killer Kush Day 14
High temp - 84
Low temp - 75 (usually at night)
High RH - 73%
Low RH - 35% I have a cheap humidifier with a built in humidistat that has proven to be completely unreliable. I set it to 55RH and it turns off while my temp and RH monitor says the humidity is 35RH. I turn it up to 65, go back into my tent an hour later and the RH is at 73. I will need to find another way to dial the RH in.
Reservoir PH- Increased from 5.52 to 5.89- No longer using distilled water. PH is still rising after a day or so but stays stable after 3 days. Not sure why this is happening, but I PH down when My PH gets close to 6.3.
Reservoir current temp. 68 degrees.
I did a little bit of LST on the Gorilla OG. I I plan to top the Killer Kush in a day or so.
Third week feed. I believe these plants are a bit on the small side. Because this is my first coco grow, I have been feeding really lite. This grow is an experiment so that I can dial in these nutes to see how the plants respond. long story short, I'm increasing my feed amounts a tad. Fingers Crossed!

Tonight I will be feeding these plants a tsp of RG Recharge in 5.6 PH'd down water. In the morning they will receive the following from the reservoir:
2ml of Armor Si, 6.5ml of Part A and B, 2.5ml of rapid start - per gallon- 651 ppm 5.7 ph.

Auto Gorilla OG
IMG_20191126_222512622.jpg
IMG_20191126_222537914.jpg

Killer Kush F1 Fast Version
IMG_20191126_222531416.jpg
IMG_20191126_222520982.jpg

Today's report
Auto Gorilla OG Day 16
Killer Kush Day 8
High temp - 83
Low temp - 71
High RH - 65%
Low RH - 48%
Reservoir PH- Increased from 5.56 to 5.93- I believe that this is caused by the distilled water. Not sure.
Reservoir current temp. 68 degrees.
First feed as follows 15ml of Armor Si, 15ml of Part A and B, 15ml of rapid start - per gallon- 300 ppm 5.8 ph.
Second week feed 15ml of Armor Si, 28 ml of part A&B, 17.5ml of rapid start, teaspoon of recharge top feed- per gallon- 472 ppm 5.5 ph.

Auto Gorilla OG
IMG_20191120_232719939.jpg


Killer Kush f1 fast photo

IMG_20191120_232709952.jpg

Flora Flex system fed from pump. This system is meant for 4 plants but I'm only running 4 lines instead of 8 because I'm only running two plants.
IMG_20191117_082641362.jpg

IMG_20191117_082812962 (2).jpg
  • day 30.jpg
    day 30.jpg
    2.5 MB · Views: 148
  • IMG_20191208_230347139.jpg
    IMG_20191208_230347139.jpg
    2.4 MB · Views: 217
  • Like
Reactions: Steviestash

Comments

Looking good just in case you didn't know you can add pages to your blog entries so you don't have to keep making blog entries to update the same plants
 
@Stroke1 - some advice if you’re open to it with nothing but good intentions to help you along. It’s completely fine if you don’t, I won’t be offended. For Coco Coir your pH should be between 5.8 and 6.4. I usually start at a lower pH and increase as the plant gets older. At this stage, you should be watering to run off every feeding. Did you add perlite to your coco? What brand of coco do you use? Do you rinse it and precharge it? I would also increase your feed gradually until you see the tips start to burn and then back them off.
 
@Stroke1 - some advice if you’re open to it with nothing but good intentions to help you along. It’s completely fine if you don’t, I won’t be offended. For Coco Coir your pH should be between 5.8 and 6.4. I usually start at a lower pH and increase as the plant gets older. At this stage, you should be watering to run off every feeding. Did you add perlite to your coco? What brand of coco do you use? Do you rinse it and precharge it? I would also increase your feed gradually until you see the tips start to burn and then back them off.
Thanks for the input. I usually pH down to 5.5 because the pH in my reservoir raises on it's own. My PH will jump from 5.5 to about 6.2 in 3 days or so. My system is an auto drip, drain to waste system and I have my timer set to water to run off 6 times per day. My coco is from house and garden. It comes rinsed and buffered (it better for 30 bucks). So far it's been great. I'm using house and garden, coco base nutrients. It has been good so far. Easy to use, the plants seem to like it and it comes with cal mag in it so that's one less bottle that I have to buy and mix in. I have been increasing my nutes slowly but I just backed off a little bit because a few of my leaves are dark green and some tips are clawing a bit . My humidity has been good so I believe they have been getting a little too much nitrogen. It's about that time to start flowering so I backed off of the base nutes a little and added liquid Kool bloom. So I'm getting a little less nitrogen and more P & K. We'll see what happens.

Thanks again for chiming in. Any info is appreciated .
 
Looking good. Just my two cents do not over due the PPMs especially if you are watering six times a day. There is now point getting up over 800 if you are constantly suppling it more food which you are. You might want to make sure you get some run off to keep build up from happening.

Sorry if none of that makes sense a little blazed right now. :vibe:
 
Looking good. Just my two cents do not over due the PPMs especially if you are watering six times a day. There is now point getting up over 800 if you are constantly suppling it more food which you are. You might want to make sure you get some run off to keep build up from happening.

Sorry if none of that makes sense a little blazed right now. :vibe:
I've been reading even more about ppm and ec and you were absolutely right on point. I started getting white tips on my Killer Kush the day after you posted this. However, this Auto Gorilla OG is a beast. She is taking everything I throw at her and just getting bigger. I took the Killer Kush out of my 3x3 tent because I believe my girl Gorilla OG will benefit from the extra light, space and airflow. The Killer Kush is a photo anyway and I want to put her on 12/12 to finish her out, so sadly she will be a closet grow.
.
 
M
I've been reading even more about ppm and ec and you were absolutely right on point. I started getting white tips on my Killer Kush the day after you posted this. However, this Auto Gorilla OG is a beast. She is taking everything I throw at her and just getting bigger. I took the Killer Kush out of my 3x3 tent because I believe my girl Gorilla OG will benefit from the extra light, space and airflow. The Killer Kush is a photo anyway and I want to put her on 12/12 to finish her out, so sadly she will be a closet grow.
.
My timing is rarely ever that good, glad you noticed it though sometime people get a few beast plants in a row and they will take anything so they think that is what you do every time. I learned the 800 number through trial and error and a lot of conversations with other coco growers in the coco forum. 800 seems to not burn the finicky plants but not starve the monsters. It is of course a general rule as if at 800 I get some tips going I back it down 100 and then go back up in a week. Some of it goes back to your original post about flavor I had some monsters that I took up to 1100 or so and I could taste it in the end product. White Widow and Blackberry Kush they both were monsters but it was subtle I could taste the metallic if that makes sense. Besides nutes are not cheap no need just flushing them away.
 
I agree. I cut my base nutrients in half because I just started my bloom booster and added humic acid. I was getting my humic acid from recharge but decided to go bottle. Hard to keep microbes in a system that is drain to waste. Can't put recharge in my res so diamond nectar was my second best choice. My ppm clicked in at 710. My plant is already praying from her 7am feed.

I'm going to add a grow update in a bit. Baby girl has taken over the whole tent. She is completely exceeding my expectations. I may never go back to soil.
 
Thanks for the input. I usually pH down to 5.5 because the pH in my reservoir raises on it's own. My PH will jump from 5.5 to about 6.2 in 3 days or so. My system is an auto drip, drain to waste system and I have my timer set to water to run off 6 times per day. My coco is from house and garden. It comes rinsed and buffered (it better for 30 bucks). So far it's been great. I'm using house and garden, coco base nutrients. It has been good so far. Easy to use, the plants seem to like it and it comes with cal mag in it so that's one less bottle that I have to buy and mix in. I have been increasing my nutes slowly but I just backed off a little bit because a few of my leaves are dark green and some tips are clawing a bit . My humidity has been good so I believe they have been getting a little too much nitrogen. It's about that time to start flowering so I backed off of the base nutes a little and added liquid Kool bloom. So I'm getting a little less nitrogen and more P & K. We'll see what happens.

Thanks again for chiming in. Any info is appreciated .

Regarding the increase in pH - some things to consider:

You might have luck letting your water settle for a few hours, after pouring from your source. Dissolved gas concentrations are higher for liquids under pressure, and these gases influence pH.

It may be as simple as mixing your solution more during pH adjustment. A good rule of thumb is to wait one minute after your final reading, and repeat the measurement. Some drift in measured value is expected for unbuffered solutions or if using an imprecise probe, but directional trends indicate an acid-base reaction of some sort, of poor kinetics.

What I'd suggest is to prepare a buffered solution. A buffered solution will maintain a tight pH range until the 'buffer capacity' of the solution is overwhelmed. pH calibration standards are prepared in this way, and as such can accommodate small additions of water or acid/base without the pH of the solution changing. It's really easy to do, and you've likely done it before without realizing. I'd go over the chemistry of it more but this is already getting long.

Essentially, you want to add a controlled amount of either pH up or pH down, and then add the opposite slowly, such that the solution pH reaches your desired pH. You'll find that such a solution can accommodate additions of acid or base without the pH changing appreciatively, until the buffering capacity is overwhelmed. So, if more buffering capacity is desired, add more of your initial adjusting solution (pH up or down) and proceed as normal. However, be aware that pH up and pH down will both contribute to your EC, as we're talking about adding more ions to the solution.

Slow kinetics with multistep reactions are likely the cause of your issue. The buffering capacity of such a solution will accommodate any late comers, without the pH changing in the res.
 
Regarding the increase in pH - some things to consider:

You might have luck letting your water settle for a few hours, after pouring from your source. Dissolved gas concentrations are higher for liquids under pressure, and these gases influence pH.

It may be as simple as mixing your solution more during pH adjustment. A good rule of thumb is to wait one minute after your final reading, and repeat the measurement. Some drift in measured value is expected for unbuffered solutions or if using an imprecise probe, but directional trends indicate an acid-base reaction of some sort, of poor kinetics.

What I'd suggest is to prepare a buffered solution. A buffered solution will maintain a tight pH range until the 'buffer capacity' of the solution is overwhelmed. pH calibration standards are prepared in this way, and as such can accommodate small additions of water or acid/base without the pH of the solution changing. It's really easy to do, and you've likely done it before without realizing. I'd go over the chemistry of it more but this is already getting long.

Essentially, you want to add a controlled amount of either pH up or pH down, and then add the opposite slowly, such that the solution pH reaches your desired pH. You'll find that such a solution can accommodate additions of acid or base without the pH changing appreciatively, until the buffering capacity is overwhelmed. So, if more buffering capacity is desired, add more of your initial adjusting solution (pH up or down) and proceed as normal. However, be aware that pH up and pH down will both contribute to your EC, as we're talking about adding more ions to the solution.

Slow kinetics with multistep reactions are likely the cause of your issue. The buffering capacity of such a solution will accommodate any late comers, without the pH changing in the res.
Thanks for the info. The pH fluctuations have subsided. I wasn't giving my reservoir time to settle after mixing it. Now I get my reservoir to my desired pH lvl, wait 2 hours and then test it. 10 times out of 10, it will jump from a 5.7 to about a 6.1. I'm currently in flower so that PH range is good for me. After it hits 6-6.1, it stays there. Also, my reservoir was too big. I believe this contributed to the pH increase. I went from a 12 gallon res back to a 7. This means my res is changed out more frequently which is probably best for the plant. Even with the air stone, my res gets a bit cloudy and develops floaters after about 4-5 days.
 

Blog entry information

Author
Stroke1
Read time
10 min read
Views
1,837
Comments
10
Last update

More entries in Indoor Grow Journals

More entries from Stroke1

Back
Top