Happy new yer by the way!!! 
:hug:
:hug:
Indoor FİRST DWC GROW "Think Dİfferent" need help all the way through...
- Thread starter liquidsun
- Start date
here is the new pics of today...
there is some root color change if you can see from the picture. Yesterday i add 10ml root complex more to reservoir, could it be caused by?
whats going on liquid sun, i noticed no one replied to your question about ec and ppm and i figured id try to help out. ec is a measure of electrical conductivity. basically distilled water does not conduct electricity or boil for that matter, it needs something like salts, not NaCl though like table salt, in this case your nutrient solutions. your EC meter will send an electric current through the water and based on its calibration (usually us 1413 or ms 1.413 ) will calculate the electric conductivity of the solution the meter is currently in.
With that being said calculating between ms, us, and ppm is unbelievably easy which is probably why no one cared to comment, not to mention you dont seem to be in any need of real assistance your plants seem to happy as a dyke in a hardware store (George Carlin). The u in us, which is actually represented by the greek letter μ can be easily converted to ms by multiplying it by 1000, or moving the decimal place over to the left 3 times. so in the example above 1413 us is 1.413 ms. This is specifically electric conductivity, not that you cannot extrapolate the ppm from the ec.
if you have a us of 1413 for example and was wondering what the ppm was, you would simply divide it by 2 or multiply it by .5 (or half). therefore the 1413 solution would have a ppm of 706.5.
_________________________________________________________________________________________________________________________________________________________________________
if your EC is to high all you have to do is add water, if that doesnt work remove solution and add water.
_________________________________________________________________________________________________________________________________________________________________________
as for your nutrient solution, i use the AN ph perfect and from what ive read, it kinda blows because of the buffers dissolved in the solution, meaning it might have a higher EC not because of its nutrient concentration, but because it has other additives to adjust the PH. but none the less for seedlings before they have 3 sets of leaves i usually only let the ec get up 600 us or .6 ms after they have 3 sets i let it chill around 800 us or .8 ms, once they have 5 sets or more i usually increase it to 1.2 ms or 1200 us. from what ive heard from many growers and from what ive read about 1.4 ms is the highest you can push a plant, i like it being around 1.2 because if i decide to go out that night and dont come home, i dont have to worry to much about the EC getting to high, this is because i have a small little DWC that only holds about 10 liters in the beginning of a grow (it decreases due to fat roots and shit).
for your feeding schedule when in doubt LESS IS MORE!!!!! i cant stress that enough, if your bitch is hungry, she'll let you know.
also i verified all my info from this site
http://www.420magazine.com/forums/how-grow-marijuana/71813-what-difference-between-ppm-ec.html
hope I helped you out if you didnt figure it out on your own, which based on your plant you seem to be on your way bro :smoke:
-Sherlock :eye:
With that being said calculating between ms, us, and ppm is unbelievably easy which is probably why no one cared to comment, not to mention you dont seem to be in any need of real assistance your plants seem to happy as a dyke in a hardware store (George Carlin). The u in us, which is actually represented by the greek letter μ can be easily converted to ms by multiplying it by 1000, or moving the decimal place over to the left 3 times. so in the example above 1413 us is 1.413 ms. This is specifically electric conductivity, not that you cannot extrapolate the ppm from the ec.
if you have a us of 1413 for example and was wondering what the ppm was, you would simply divide it by 2 or multiply it by .5 (or half). therefore the 1413 solution would have a ppm of 706.5.
_________________________________________________________________________________________________________________________________________________________________________
if your EC is to high all you have to do is add water, if that doesnt work remove solution and add water.
_________________________________________________________________________________________________________________________________________________________________________
as for your nutrient solution, i use the AN ph perfect and from what ive read, it kinda blows because of the buffers dissolved in the solution, meaning it might have a higher EC not because of its nutrient concentration, but because it has other additives to adjust the PH. but none the less for seedlings before they have 3 sets of leaves i usually only let the ec get up 600 us or .6 ms after they have 3 sets i let it chill around 800 us or .8 ms, once they have 5 sets or more i usually increase it to 1.2 ms or 1200 us. from what ive heard from many growers and from what ive read about 1.4 ms is the highest you can push a plant, i like it being around 1.2 because if i decide to go out that night and dont come home, i dont have to worry to much about the EC getting to high, this is because i have a small little DWC that only holds about 10 liters in the beginning of a grow (it decreases due to fat roots and shit).
for your feeding schedule when in doubt LESS IS MORE!!!!! i cant stress that enough, if your bitch is hungry, she'll let you know.
also i verified all my info from this site
http://www.420magazine.com/forums/how-grow-marijuana/71813-what-difference-between-ppm-ec.html
hope I helped you out if you didnt figure it out on your own, which based on your plant you seem to be on your way bro :smoke:
-Sherlock :eye:
thank you man for stop and your thread.It's helped to me lot..
Today is the 19th day of TD. She is growing fast and healthy.Still don't have EC and PH meter(digital one).
and she is now under 250w HPS.
Today is the 19th day of TD. She is growing fast and healthy.Still don't have EC and PH meter(digital one).
and she is now under 250w HPS.
Last edited:
are you fucking kidding me!?!? bro that shit looks healthy as fuck and you dont even have a ph meter:jaw:!!!
i killed my first plant cuz i didnt have a ph meter and i was using soil none the less where you cant fuck up so long as youre using water that doesnt have a ridiculously high or low PH.
bro youre a legend in my book, :clap:
your new nickname is Caesar Weedlan The Plant Whisperer lololololol, but either way good karma and grow vibes your way brahhhh
-Sherlock:eye:
i killed my first plant cuz i didnt have a ph meter and i was using soil none the less where you cant fuck up so long as youre using water that doesnt have a ridiculously high or low PH.
bro youre a legend in my book, :clap:
your new nickname is Caesar Weedlan The Plant Whisperer lololololol, but either way good karma and grow vibes your way brahhhh
-Sherlock:eye:
I am using Hesi hydro nutes..
right now 2/3 strength of nutes what it says on the schedule. Hey Sherlock, I have ph strips for aquariums, it calculates like 4.0 - 4.5 -5.0 - 5.5 - 6.0- .....Don't now the EC...
right now 2/3 strength of nutes what it says on the schedule. Hey Sherlock, I have ph strips for aquariums, it calculates like 4.0 - 4.5 -5.0 - 5.5 - 6.0- .....Don't now the EC...
alright well thats still pretty good man best of luck bro and ill be watching to see how this plays out lolol
DAY 21
I changed the reservoir..
New Nutrient ratio...
added/Max in 16,5L
Grow 60ml/80ml
Root Complex 60ml/ 80ml
PowerZyme 30ml/ 32ml
Super Vitamin 3 drop/ 3 drop
I changed the reservoir..
New Nutrient ratio...
added/Max in 16,5L
Grow 60ml/80ml
Root Complex 60ml/ 80ml
PowerZyme 30ml/ 32ml
Super Vitamin 3 drop/ 3 drop
Similar threads
