Lighting Fugue State, Autocobs, and Advanced Nutrients

Is the soil drying out well between feedings?
 
Do you think I need to do a full flush? As in putting 25 litres through each? Or should I attempt a very hearty watering with very light feed and cal mag?
 
Is the soil drying out well between feedings?
Yes. The last 10 days or so they’ve been getting 2.5 litres between the 3 daily.... I’m considering mixing up 3 2.5litre jugs and giving each one 2.5 litres of a very light feed and cal mag. All these pics are from one plant...
FCC874B4-46A9-498C-80BE-B03E9165D937.jpeg
4A192336-8C7D-4E7A-B816-41B1713E27E7.jpeg
EDC9E830-C0F3-4A73-B26C-A0851F51353A.jpeg
50081AA3-BF92-471E-A406-83CCC494575E.jpeg
92B00C43-B222-4375-A8D1-4DD8709329D3.jpeg
9B4CB898-2553-47BF-B9FE-CB1A079EFE9F.jpeg
 
Any foliar spray?
 
What exactly are you feeding them now? To me they look Light stressed, too much light. An easy way to tell... Turn off a cob. I believe you have 3? Try it for a couple of days. Otherwise you may need more Cal-Mag as well. I use 8ml per gal. Just a couple things to keep in mind.
 
I just looked back to check couldn't remember if it had been used. Ya me personally only from seeing something pretty similar from looks to look of the leaves them selves. What I did was flush good not tons not little but enough and put 1 tbsp of Epsom salt half gallon of warm water, fill up with cold after 15mins then flush (mine 2.25 gallon Coco pot) , put a fan on it then water and nutes once ready again. Flush per pot size.
 
What exactly are you feeding them now? To me they look Light stressed, too much light. An easy way to tell... Turn off a cob. I believe you have 3? Try it for a couple of days. Otherwise you may need more Cal-Mag as well. I use 8ml per gal. Just a couple things to keep in mind.
2ml/L CaliMagic, 1ml/L AN bloom a&b, 1ml/L b52, 1ml/L big bud, 1ml/L bud candy. This has been the last 2 feedings. Prior feedings were very similar just subbing out one for another in most cases regarding the additives. In addition to this I’ve actually implemented AN revive into the mix after seeing the initial symptoms. I’m now starting to think that may have made things worse as I’m thinking perhaps that product is to be used as a standalone when symptoms are present? Maybe adding that to the feed put things way over the edge?
 
Back
Top