Lighting Just throwing this out here, you have a $400.00 target ( not set in stone), what l light are you buying ?

[pias]

$400.00 target, not set in stone, what light are you buying. Gorilla 4x4 tent.

 

[FarmerJake]

Tent matters for spread to make the right choice…. So what tent you running? Bar style lights are great. FC series by Mars Hydro or similar. I love my Vivosun Aerolight but it’s not cost competitive compared to most other lights

 

[Drownomatic]

I'll second that. Mars Hydro FC4800 will fit in a 3x3, and is enough for most 4x4 growers.

In general, a bigger bar style light will pattern better than small boards.

I have 4 of their lights and don't regret.

 

[Mozzy]

For that price, depending on footprint, and where you are, you could get a HLG 350 (on sale periodically); which I've heard enough good things about, to consider for your hypothetical

 

[Lil Dab]

I agree with everyone else marshydro or HLG. They are both active on AFN so if any issue arise they should be worked out in a reasonable timeframe. I would go as big as you can afford you can always turn the light turn down but it’s really hard to give it more power if needed. Plus it will run cooler not running at 100%

 

[DCLXVI]

I have a @Marshydro FC-E 4800 in my 4x4. It fits great and leaves enough room on one side for a decent sized filter/fan setup. They list it on their website for $440-ish but it goes on sale regularly, and I think right now for $373.

The regular FC-4800 has Samsung chips and is $500+
The FC-E4800 uses Bridgelux chips.

Mars Hydro Smart Dimmable FC-E4800 Bridgelux 480W Full Spectrum LED Grow Light for Indoor Plants

www.mars-hydro.com

I have not been dissapointed at all in the Bridgelux LEDs. The fit and finish on the Mars kit is not as nice as some of the others out there but you are paying for function over form. They give you a lot of light for the money so decide if that is important to you. The FCE in particular has a wangly wiring setup. It's out of the way but you do have connectors and wires hanging outside the frame. It's easy to manage but be aware.

I still recommend it at $400 for a 4x4 space.

Here are some pics of mine: Make sure you have 4 ratchet hangers or you won't get much height.

The wiring harness: All the bars connect into one cord and this setup allows you to move and position the bars

If you don't use 4 rope ratchets, one on each corner, the supplied steel hangers will only get you 52" of height.

 

[N/A-Greengo]

PHLIZON FD6000 640W Full-spectrum Daisy Chain Dimmable Cost-effective

PHLIZON FD6000 640W full-spectrum high-efficient LED grow light for 4×4ft indoor plants, designed with high-quality SMD chips Samsung LED 281B, offers dimmable 0-10 light, daisy chain up to 50 lights, ideal for seedling and germination and flower. Best indoor grow light for indoor plants and...

www.phlizonstore.com

 

[Drownomatic]

One of the nice things about the FC line is that each bar is wired separately. This allows you to remove bars if you want less light for seedlings on one side, or to zip tie some of them to tent poles for side light

 

[pias]

I have a @Marshydro FC-E 4800 in my 4x4. It fits great and leaves enough room on one side for a decent sized filter/fan setup. They list it on their website for $440-ish but it goes on sale regularly, and I think right now for $373.

The regular FC-4800 has Samsung chips and is $500+
The FC-E4800 uses Bridgelux chips.

Mars Hydro Smart Dimmable FC-E4800 Bridgelux 480W Full Spectrum LED Grow Light for Indoor Plants

www.mars-hydro.com

I have not been dissapointed at all in the Bridgelux LEDs. The fit and finish on the Mars kit is not as nice as some of the others out there but you are paying for function over form. They give you a lot of light for the money so decide if that is important to you. The FCE in particular has a wangly wiring setup. It's out of the way but you do have connectors and wires hanging outside the frame. It's easy to manage but be aware.

I still recommend it at $400 for a 4x4 space.

Here are some pics of mine: Make sure you have 4 ratchet hangers or you won't get much height.

The wiring harness: All the bars connect into one cord and this setup allows you to move and position the bars

If you don't use 4 rope ratchets, one on each corner, the supplied steel hangers will only get you 52" of height.

Great response, I appreciate the effort.

 

[throxic]

A little more than 400, but can't beat 800watt at $459 using discount code CCFC.

Cultiuana CT-800