Why not just buy the auto valve by itself vs destroying one of the auto pots?You might have to destroy a tray by cutting out the section where the valve snaps in and using epoxy to secure it to the bottom of your earthbox so the valve doesn't float.
They make these but apparently still gotta use it on your garden hose spigot! Haven’t designed a gravity flow one yet!That's the plan. I'm wondering if it's that easy. Usually, things aren't.
@FullMoonparty this plan won’t work regardless! Auto valves only let out so much water and won’t let out enough to submerge itself and an earthbox holds 3gal of water so way more then one of them valves can supply!Dremel tool with a cutting disk it should be easy. Just go from the bottom side, cut out the whole bottom then trim off what you don't need. I would at least leave the plastic that's under the whole valve.
Because there is a clip in the tray bottom that keeps the valve from floating and at the right height ( about 1/8 inch ) from bottom of tray.Why not just buy the auto valve by itself vs destroying one of the auto pots?
Amazon product ASIN B08KSVG9G8
They make these but apparently still gotta use it on your garden hose spigot! Haven’t designed a gravity flow one yet!
![]()
EarthBox Automatic Watering System
Provide a constant water supply to your EarthBox planter boxes with our no-hassle automatic watering system for potted plants. Just set it and forget it.earthbox.com
@FullMoonparty this plan won’t work regardless! Auto valves only let out so much water and won’t let out enough to submerge itself and an earthbox holds 3gal of water so way more then one of them valves can supply!
Should work no matter the size of the "tray"....they use the same valve in their single trays and the twin pot trays. Just looked on site and they have setup for planters and narrow beds ( AQUAbox straight ) and wide raised beds ( AQUAbox Spyder.....@FullMoonparty this plan won’t work regardless! Auto valves only let out so much water and won’t let out enough to submerge itself and an earthbox holds 3gal of water so way more then one of them valves can supply!