Sweet Seeds MaxPowerGrows....Closet of Clones

[MaxPowerGrows]

hey everyone, I chose to put this thread in the sweet seeds forum since a few of the clones are sweet seeds autoflowering Black Cream. There are also a few clones of an autoblueberry by bulldog, and just a mix of other auto and photosensitive strains. Ive always enjoyed playing around with clones and consistently maintain clone buckets. I root the cuttings with rooting hormone and put them in the Aeroponic clone bucket until they have a nice root mass, then i put between five and twenty five clones in a 5 gallon bucket, with an airstone at the bottom, 3 inches of hydroton, then filled up with foxfarm perlite. sometimes i cut lots of holes in the bottom of the bucket and sit it in a larger reservoir of nutrient solution. Other times i only drill one hole in the side of the bucket, 4 inches up from the bottom, and this hole is the water overflow hole. i put an airstone in the bucket, 3 inches of hydroton, and fill with perlite, fill the bucket up with nutrient solution until it starts to come out the overflow hole. Once it stops overflowing, which only takes a second since im careful not to overfill it, i stuff a piece of foam clone collar in the hole to block any stray light that might want to try and cause root issues. Then refill as needed, and because of the overflow hole its impossible to drown the plants. And still other times ill do that exact same thing but not drill an overflow hole in the side. If that interests you,, please see my Sour Hound grow journal Sour Hound by@mephisto .

Here is some pics of the aeroponic clone bucket,

@912GreenSkell
@gbd
@uncanni
@Pops
@Rebel
@Sweet Seeds Jay

 

[MaxPowerGrows]

hey everyone, I chose to put this thread in the sweet seeds forum since a few of the clones are sweet seeds autoflowering Black Cream. There are also a few clones of an autoblueberry by bulldog, and just a mix of other auto and photosensitive strains. Ive always enjoyed playing around with clones and consistently maintain clone buckets. I root the cuttings with rooting hormone and put them in the Aeroponic clone bucket until they have a nice root mass, then i put between five and twenty five clones in a 5 gallon bucket, with an airstone at the bottom, 3 inches of hydroton, then filled up with foxfarm perlite. sometimes i cut lots of holes in the bottom of the bucket and sit it in a larger reservoir of nutrient solution. Other times i only drill one hole in the side of the bucket, 4 inches up from the bottom, and this hole is the water overflow hole. i put an airstone in the bucket, 3 inches of hydroton, and fill with perlite, fill the bucket up with nutrient solution until it starts to come out the overflow hole. Once it stops overflowing, which only takes a second since im careful not to overfill it, i stuff a piece of foam clone collar in the hole to block any stray light that might want to try and cause root issues. Then refill as needed, and because of the overflow hole its impossible to drown the plants. And still other times ill do that exact same thing but not drill an overflow hole in the side. If that interests you,, please see my Sour Hound grow journal Sour Hound by@mephisto .

Here is some pics of the aeroponic clone bucket,View attachment 822508 View attachment 822509

ONCE the cuttings have a nice root structure I plant a bunch in one pot, sometimes just one in a small pot, like in the one pic, and other times just plant one in a large pot if I want a bigger plant.

 

[MaxPowerGrows]

The blue bucket vegged for ten days after I planted the clones in it. they have been in flower for fifteen days, so 25 days since clone in pot date.
In the The black bucket, the one with the blooming clones, (not the aeroponic clone bucket, the 5 gallon black one with the red tomato cage around it, with small budding clones in soil) those clones went straight into bloom the day they were planted. Which was 40 days ago. I just put fifteen new cuttings in the aeroponic cloning bucket, mostly more auto strains, hopefully they will be ready for planting with a full root structure in ten days from now. Thanks for tagging along everyone! Your input is appreciated.

 

[MickJ]

I'm in.

Sent from my Moto G (4) using Tapatalk

 

[MaxPowerGrows]

I'm in.

Sent from my Moto G (4) using Tapatalk

Thanks for joining in, your input and opinion is valued here. Thanks again!!

 

[Sweet Seeds Jay]

I’m subbed to this one mate, all the best with the grow!
Jaypp

 

[MaxPowerGrows]

Here is some pics of the clone buckets that live outside, the budding clones are from stuff I bought from a local outside of Cancun, just Schwag when I bought it but growing it properly yielded pretty plants that were clearly a sativa with a haze type high, low yielding though, only got 60 gs per plant and they were six feet tall. Here's a pic of it

 

[MaxPowerGrows]

I’m subbed to this one mate, all the best with the grow!
Jaypp

Thank you, you opinion is of value here .

 

[MaxPowerGrows]

Here is a pic of one of the males from the Mexican Schwaghaze that I kept, way off the edge of the property,.

 

[MaxPowerGrows]

Here is some pics of the clone buckets that live outside, the budding clones are from stuff I bought from a local outside of Cancun, just Schwag when I bought it but growing it properly yielded pretty plants that were clearly a sativa with a haze type high, low yielding though, only got 60 gs per plant and they were six feet tall. Here's a pic of it

Here is a pic of one of the nugs harvested from the Mexican sativa. took 12 weeks to finish bloom. vegged for a little more than two months outdoors before it started bloom, it was very stretchy with obvious haze shaped nugs.