Lights: t5 fluorescent, 1000w MH, 1000w HPS
Growing space: Tent 5' by 5' by 2m long
First off, thanks to anybody that helped me on this forum. You guys have been amazing and I've learned so much from everybody here. As it stands, this is the info I have:
I'm going to start in 3G plastic pots, 70:30 ratio coco/perlite. Pre charge the coco, wait 24 hours, 10-15mm hole, plop the seeds in. Then at that point, I won't have to water for a while most likely. Might take some days. I'll be keeping close tabs on the coco to make sure it doesn't dry out before I do the next watering after I start germ. The t5 will be 6" above at the start. It will be 4" or 5" after a day or two. Then a few days later it will be at 3".
I got the plan for veg laid out pretty well. I have a good idea on when I should switch to my 1000w MH. Around 2 weeks in, I'll be halfway done w/ veg is the timetable I've been given. I'll switch to the MH then. I'll switch to the bulb to the HPS when it starts stacking growth, and will most likely feed twice a day from that point. Strain will most likely be White Widow. I'm gonna aim for 8 plants minimum, get a ninth in there when I judge the space accordingly.
Gonna try to LST. I heard you can start low stress training whenever. Won't lolipop, and won't defoliate. Everything seems really straight forward. My friend is getting his new place in around a month and I'll be setting everything up then. Need to buy new t5 lights since some of mine cracked in storage. I hope I can amazon those. Hope those 16'' saucers are good for the 3G pots. My main concern was how so many plants would do under the t5 fluorescent initially, however a lot of people advised me to rotate the plants in and out so that's what I'll do to solve that potential issue. Does everything here seem solid to you guys? I'm gonna try to buy another cheap ppm meter. I already have one, but I'm pretty sure it's trash. I'll have the pH drops to be sure of my pH level.
Growing space: Tent 5' by 5' by 2m long
First off, thanks to anybody that helped me on this forum. You guys have been amazing and I've learned so much from everybody here. As it stands, this is the info I have:
I'm going to start in 3G plastic pots, 70:30 ratio coco/perlite. Pre charge the coco, wait 24 hours, 10-15mm hole, plop the seeds in. Then at that point, I won't have to water for a while most likely. Might take some days. I'll be keeping close tabs on the coco to make sure it doesn't dry out before I do the next watering after I start germ. The t5 will be 6" above at the start. It will be 4" or 5" after a day or two. Then a few days later it will be at 3".
I got the plan for veg laid out pretty well. I have a good idea on when I should switch to my 1000w MH. Around 2 weeks in, I'll be halfway done w/ veg is the timetable I've been given. I'll switch to the MH then. I'll switch to the bulb to the HPS when it starts stacking growth, and will most likely feed twice a day from that point. Strain will most likely be White Widow. I'm gonna aim for 8 plants minimum, get a ninth in there when I judge the space accordingly.
Gonna try to LST. I heard you can start low stress training whenever. Won't lolipop, and won't defoliate. Everything seems really straight forward. My friend is getting his new place in around a month and I'll be setting everything up then. Need to buy new t5 lights since some of mine cracked in storage. I hope I can amazon those. Hope those 16'' saucers are good for the 3G pots. My main concern was how so many plants would do under the t5 fluorescent initially, however a lot of people advised me to rotate the plants in and out so that's what I'll do to solve that potential issue. Does everything here seem solid to you guys? I'm gonna try to buy another cheap ppm meter. I already have one, but I'm pretty sure it's trash. I'll have the pH drops to be sure of my pH level.