Harvest & Curing Need help with harvest

[bir123]

I go 5 23 watt ATM how much do u think I need again ? Like watts wet plant ?

Sent from my HTC One M9 using Tapatalk

 

[bir123]

yeah I thought as much,unsure if it has been mentioned but you need to get some more lights on that.dunno if you did or not,just due to the fact ,when you use small CFL's on plants there has to be more as the plant get bigger.they dont put out enough so in turn almost always the flowers are a tad under developed and ripen up slower than usual.so thats especially why you need a focusable USB cam or those loupes I mentioned a bit ago. they'll work great.

View attachment 589998 View attachment 589999 View attachment 590000 View attachment 590001

I try and use my camera lol was using my phone's one all the time .

Sent from my HTC One M9 using Tapatalk

 

[Eyes on Fire]

some times with phone lenses you can use a lit loupe and adjust the two distances and usually work on capturing a few in focus Macro styled pics. just play with it,it works.

 

[bir123]

Orr OK ill play around and see.



Sent from my HTC One M9 using Tapatalk

 

[millertm]

Looks good, you'll foxtail more under CFL'S but that's not bad looking at all. Great job, lots can happen in 60 days. It takes dedicated time to get a plant to harvest.

Cheers

Sent from my SPH-L720T using Tapatalk

 

[millertm]

I go 5 23 watt ATM how much do u think I need again ? Like watts wet plant ?

Sent from my HTC One M9 using Tapatalk

I'd use 2x23 watts on three sides and 65 watt above. I'd also look into a 2 foot 8 bulb T5HO at 192 watts it's great for a 2x2 area.

My last plant was finished under 400 watt MH, 192 watts T5HO, and 91 watts of CFL. Ended up under 800 watts of HPS but heat caused me to drop from 1050 watts, to 800 watts (750 + 50 overdrive), 600 to what I posted. It cooled off again but fluorescent lighting is easy heat to control.

Cheers

yeah I thought as much,unsure if it has been mentioned but you need to get some more lights on that.dunno if you did or not,just due to the fact ,when you use small CFL's on plants there has to be more as the plant get bigger.they dont put out enough so in turn almost always the flowers are a tad under developed and ripen up slower than usual.so thats especially why you need a focusable USB cam or those loupes I mentioned a bit ago. they'll work great.

View attachment 589998 View attachment 589999 View attachment 590000 View attachment 590001

Sent from my SPH-L720T using Tapatalk

 

[bir123]

I'll have to upgrade my setup for the next plant. And that's a nice set up in the pic .

Sent from my HTC One M9 using Tapatalk

 

[bir123]

How long again you guys think I should leave it . Found a microscope but it's not strong enough and the one I ordered is carded to arrive in a week or 2.
Here are some current pic as of a few minutes ago .
BTW about 70% of the hairs are brown/ Amber .

Sent from my HTC One M9 using Tapatalk

 

[S!N!STER]

hi bir,

im not really an expert on harvest with microscope but when i look at your pics i have a feeling your trich-heads are still a bit small and need to fill more..

as Eyes on Fire and others mentioned before its the trichs that are most important and so i guess you should still have at least another week maybe even a bit longer..

im still just a rookie and i think there are people here much more experienced that will give their view so please dont take my advise too serious as it is just my oppinion and hope to see if i am near to what experienced growers say

hope these last days or weeks will do them good and youll get some fine smoke from it m8

 

[awolace]

Theyve still got afair bit of swelling to do. Start a flush and wait a couple of weeks.