Lighting 3x3 setup

I am lighting the exact same 3x3 area. I went from a 500 mh/hps combo to a five cob cxb3590 setup. The cobs max out at 320 watts at the wall but is adjustable "155 to 320 watts". As the plant grows i increase the wattage of the cobs till i max out at full blown. The cobs blow away the old junk, trunks and harvest are almost twice as large compared to the hids. Minimum amount of wattage i would go in a 3x3 would be around 200 watts "cobs" however 320 is just right.
 
Last edited:
You could also look at the chilled pucks 1 or 2 with wat u got and you would be set for nething or 1 of the qb96v2 elite i have 2 and love them
 
Thanks for this thread.

After my first (not quite) grow failure I'm upgrading and downsizing my gear.

I'v got a pair of 3500k AutoCobs on the way and a 32x32x63" tent up and ready.
 
Back
Top