Extraction Welcome to the DIY vape section

[Ripper]

Does anyone have a good starting temperature for using a hair straightener to press with? I have a digital one, just wanted a reference.

Low 180 to 210

 

[Dudeski]

Low 180 to 210

Thanks! Another question, with the half g rosin, are you filling a 1g cart or half?

 

[Ripper]

Thanks! Another question, with the half g rosin, are you filling a 1g cart or half?

Usually a half. Sometimes a little more so if you have both sizes look at your syringe when you draw it up and you will know which cartridge to use.

 

[Mr.Prospector]

I'm in...

I have a press and have done this with good results...

 

[Mr.Prospector]

True Terpenes VISCOSITY Extract Liquifier. It doesn't contain PG, VG, PEG, MCT, Coconut oil, or any other non-organic ingredients. Only 100% odorless and flavorless terpenes.

 

[Ripper]

I'm in...

I have a press and have done this with good results...

Awesome glad to have you. I hope you will make your own thread showing how you do yours.

 

[Dudeski]

Usually a half. Sometimes a little more so if you have both sizes look at your syringe when you draw it up and you will know which cartridge to use.

I probably should use half first until I get a little practice.

 

[Ripper]

I probably should use half first until I get a little practice.

Yeah that is what I did. The massterpenes has directions that involve using the oven. I use a hot plate. You will do great bud.

 

[Mañ'O'Green]

I use precision hot plate I bought for $41 I put a coffee cup over the borasilic beaker so it works like a mini oven and direct contact heat surface. I get very good decarb and it works well for this task also. A link to the thread about the hot plate is in my signature.

I took a couple of hits off the vape and all is still good. Most of my previous attempts were fouled by now!

 

[Dudeski]

I use precision hot plate I bought for $41 I put a coffee cup over the borasilic beaker so it works like a mini oven and direct contact heat surface. I get very good decarb and it works well for this task also. A link to the thread about the hot plate is in my signature.

I took a couple of hits off the vape and all is still good. Most of my previous attempts were fouled by now!

The heat pressing wont decarb enough?
Is that the qwet thread?