What's happening?

[SeedsWeeds]

Just quickly guys, so I don't fuck this up.

When I buy the PH up/down tomorrow should I flush the plant with PH'ed water, or should I feed it normally with low nutes or whaaaaat should I do :/ I want to make sure I'm bringing the plant back to how it should be. Haaaalp this noob out pls

Sent from my SM-G965F using Tapatalk

 

[cosmicinfinities]

Nioce

Sent from my SM-G950F using Tapatalk

Wow what is the set up for her, tent size, lights etc?

Sent from my ONE A2003 using Tapatalk

 

[SeedsWeeds]

So I've just bought a drip kit to test the PH and compare the colour. And I'm using my cheap Chinese PH meter to confirm the PH. I've got it down to 6.4 for the nutrient mix, I've done 2mL to L of A and B and I've also added some Rhizotonic as well to help with the roots. Is this okay? I've top fed the plant until it ran out in the drip tray, should I keep it throw away the run off? (Let it wick up the run off??)

Also, now, how often should I top feed? Every day or second day? And should I only feed with my nutrient mix, or do I feed 1 day with nutrients and the next with just PH 6.5 water? The bloke at the hydro store said to do that??? Is that right..

Sent from my SM-G965F using Tapatalk

 

[Rev. Green Genes]

Provided you have gotten the coco fully wetted again, which to be honest, I am not sure of the best way to know. If it is proper wet, than I would wick feed as you were, and every day add some ph'd water to the top.

I suspect your pot is too large to wick properly, so adding water to the top in addition will help keep this from happening. I would recommend using a smaller pot for wicking, and the larger ones do drain to waste top feed for future grows.

 

[SeedsWeeds]

Provided you have gotten the coco fully wetted again, which to be honest, I am not sure of the best way to know. If it is proper wet, than I would wick feed as you were, and every day add some ph'd water to the top.

I suspect your pot is too large to wick properly, so adding water to the top in addition will help keep this from happening. I would recommend using a smaller pot for wicking, and the larger ones do drain to waste top feed for future grows.

How often should I be top feeding? Would I make it daily, or 2nd day or 3rd day? Just need to understand better how much I should actually be feeding.

Sent from my SM-G965F using Tapatalk

 

[Rev. Green Genes]

You were doing well with feeding. As to watering from the top, it's hard to say.. maybe a liter per day? I can't answer that, it depends on the environment and how much the plants drink.

 

[SeedsWeeds]

You were doing well with feeding. As to watering from the top, it's hard to say.. maybe a liter per day? I can't answer that, it depends on the environment and how much the plants drink.

Yeah hopefully next time this doesn't happen. I just pray and hope that she recovers. Am I fine to continue to top-feed her nutrient water?

PH 6.3
2mL Coco A&B
3mL Rhizotonic
2mL Bio Diesel
Per liter of water..

Thanks so much for the help guys I'm so grateful.

Sent from my SM-G965F using Tapatalk

 

[MR magoo]

burning them bad. they seem pretty well along. it may be best to give just ph'd water till done, if you feel they need more feeding, cut your dose by 2/3.
my opinion.

 

[Waira]

looks like your water is waaay hard, meaning mineral (CaCO3) rich,.. this will drive pH up relentlessly, plus overload the coco with ions in general,... start using drinking water, Di, self-fill machine water, anything with low ppm/EC,... you have pH lockout, and until that coco is reset and dialed in, no feeds will help with the micronute defc.,... use the flushing solution I mentioned to do this,....

 

[SeedsWeeds]

looks like your water is waaay hard, meaning mineral (CaCO3) rich,.. this will drive pH up relentlessly, plus overload the coco with ions in general,... start using drinking water, Di, self-fill machine water, anything with low ppm/EC,... you have pH lockout, and until that coco is reset and dialed in, no feeds will help with the micronute defc.,... use the flushing solution I mentioned to do this,....

I will start a full flush tonight. I will use tap water and bring down the PH.. to let's say 6? Is that fine? Please advise, thanks!

Sent from my SM-G965F using Tapatalk