New Grower 1st Stealth Grow PC Style DWC

[zaza]

Hiya OOOGauto....hope all is well Bruh! Been bizy here but just wanted to say me babes are still doing great! I added some more lights the other day and already see a difference putting it near the lower part of here to give her attention below (that makes 8 cfl 2500K) .My Lowryder 2 auto is 44 days old now and man is she thickening really nice with the main Cola and all! I gave her one more watering of Fox Farms Big bloom about four days ago and a heavy watering two days ago and she seeme to love it. I have about three weeks to go but I am now reading that with CFL's it may take a week longer than it would with HPS ? It is what it is but man I cant wait to trim that bush....Ive been thinking about starting (germinating) an auto sweet skunk autoflower tomorrow to get a jump start on my next project but I would have to keep her 3 weeks outside and babysit her until my grow was ready to accept her with the cfl 6500 k for vegging...decisions decisions ! Ill have to et some more pics in a few days to show ya the progress ! Anyway.....Good to see ya ladies coming along BruH! Sending Good karma ya way!

 

[herbal.experience]

i would start the LST or set up a scrog screen set up asap ooog -- control them while they are early and it should get easier :thumbs:

keep it moving :dance:

 

[OOOGaUtO]

Nice green growth. I would make a small scrog screen and start training the girls right around now! How much height space do you have left for growth?

Vick what's up thanks for checkin again! I was thinkin about that myself but I'm not sure how to make a DIY scrog
Screen or even how big should those squares be. I'm going to guess that you def know the answer and will lead me in The right direction. Thanks in advance I know you'll come thru as always. My res is about 5" inches above the base and I'd say there's about 1ft and a half to two feet left above the light. What you think?? Thanks again

Hiya OOOGauto....hope all is well Bruh! Been bizy here but just wanted to say me babes are still doing great! I added some more lights the other day and already see a difference putting it near the lower part of here to give her attention below (that makes 8 cfl 2500K) .My Lowryder 2 auto is 44 days old now and man is she thickening really nice with the main Cola and all! I gave her one more watering of Fox Farms Big bloom about four days ago and a heavy watering two days ago and she seeme to love it. I have about three weeks to go but I am now reading that with CFL's it may take a week longer than it would with HPS ? It is what it is but man I cant wait to trim that bush....Ive been thinking about starting (germinating) an auto sweet skunk autoflower tomorrow to get a jump start on my next project but I would have to keep her 3 weeks outside and babysit her until my grow was ready to accept her with the cfl 6500 k for vegging...decisions decisions ! Ill have to et some more pics in a few days to show ya the progress ! Anyway.....Good to see ya ladies coming along BruH! Sending Good karma ya way!

Yooo Zaza good look homie & thanks for checking in. Everything has been good over here glad to hear that ur lady doing great. Not sure of the Hps CFl but I kow an Hps will def give out more lumens so maybe...but it's all good tho I'm sure you'll get a good harvest from those cfls especially adding the extra lighting. Zaza I just thought this, since u want to start that sweet skunk I'd say go for it and build a lil Rubbermaid cab like u did for germ & veg & then u would a nice perpetual somewhat sog harvests. Good karma blown ur bruh bruh :smokebuds:

i would start the LST or set up a scrog screen set up asap ooog -- control them while they are early and it should get easier :thumbs:

keep it moving :dance:

I know herbal I need to get on that asap they are growing crazy in there and really fighting for space...ima have to go over the cab rules with double diesel and let her know there's no bullying or shell get negative rep lmao I could never do that to her but I'm def feelin what u said about the space. What do you suggest I do herbal I need some micro guidance bro! :smokebuds: thanks and good look for checkin up too

 

[toke]

hey O's there is no rule on screen size with a scrog as long as it holds the girls down. I just stretched some wire across a cut out tote lid. heres a before and after day 35 and day 49. you have good looking grow my friend.

toke

 

[OOOGaUtO]

hey O's there is no rule on screen size with a scrog as long as it holds the girls down. I just stretched some wire across a cut out tote lid. heres a before and after day 35 and day 49. you have good looking grow my friend.

toke

Toke thank you very much for the help i appreciate that...as ive been sitting here all day tryin to figure what im going to do...im going to def set up a scrog i think its kinda late for LST esp the Double Diesel her stalk is finger width, and this pic def helps me out ima start googling for scrog ideas for micros grows. thanks alot toke :smokebuds: appreciate the comment as well

 

[VapedAs]

All's looking great man, can't wait to see what you decide on doing and how they go the next week or 2:gthumb:

 

[vick]

Hey man toke gave ya some good info with sweet pics. That's what you're basically looking for. As for building it, stop at home depot, grab some pvc pipe, fittings, zip ties and a roll of garden training wire. It's thick and green. Looks like fishing line but much heavier. 2-3" squares are good, depends on your preference... You should be golden with that left over height space and a good scrog going. That'll dramatically increase your final yield.

The main idea is to bend the main stem horizontally (CAREFULLY) so that the side stems grow vertically as opposed to an angle or to the side. That way your plant will send 'hormones' into the stems shooting up, making them bud nice and fat just like the main stem. LST'ing follows the same principle, except no squares.. Scrogging imho is cleaner and easier to move the stem as it grows out.

You'll want to bend the stem carefully along the wire and feed the end up a square, as it grows through that square and reaches 2 inches up, bring it back down and bend it into the next square while carefully doing the same for the side stems.

This is just info off the top of my head.. If you want to see it in detail, check out the scrogging tutorials on youtube!

GL, try to get a nice canopy going like toke showed you in those pics! :boob:

 

[OOOGaUtO]

All's looking great man, can't wait to see what you decide on doing and how they go the next week or 2:gthumb:

Vaped thanks a lot bro appreciate you keepin up with my grow. :smokebuds: I ended up making a scrog screen today & I hope they luv it and next week there's a beautiful full canopy & hopefully double the growth but ill jus be happy if they're happy and only grow 1"

Hey man toke gave ya some good info with sweet pics. That's what you're basically looking for. As for building it, stop at home depot, grab some pvc pipe, fittings, zip ties and a roll of garden training wire. It's thick and green. Looks like fishing line but much heavier. 2-3" squares are good, depends on your preference... You should be golden with that left over height space and a good scrog going. That'll dramatically increase your final yield.

The main idea is to bend the main stem horizontally (CAREFULLY) so that the side stems grow vertically as opposed to an angle or to the side. That way your plant will send 'hormones' into the stems shooting up, making them bud nice and fat just like the main stem. LST'ing follows the same principle, except no squares.. Scrogging imho is cleaner and easier to move the stem as it grows out.

You'll want to bend the stem carefully along the wire and feed the end up a square, as it grows through that square and reaches 2 inches up, bring it back down and bend it into the next square while carefully doing the same for the side stems.

This is just info off the top of my head.. If you want to see it in detail, check out the scrogging tutorials on youtube!

GL, try to get a nice canopy going like toke showed you in those pics! :boob:

Vick :grat::grat: thanks a lot you always come thru with valuable info I would max u but I have to spread more around before I give u more

You must of posted this as I was making the screen today I basically made it the same way u suggested but I used wood instead of PVC and a diff type of wire I seen on a YouTube vid. Check out my pics in my update and let me know what you think. I'm going to have to check a lil more on scrog maintenance....I guess, bc I thought u just put the screen in there and let them go to work lol thank you again Vick for saving ur boi! :smokebuds:

 

[VapedAs]

No problem man, I fall behind sometimes but catch up most the time:joint:

Slapped Vick silly on your behalf... some good info being passed on!:group:

 

[OOOGaUtO]

Day 18 CB & DD
Day 12 AA

Busy day & I'm really tired...short post. Made my own lil scrog for the cab today thanks everyone for their help, pics below please let me know what you think & if I should make adjustments. Changed the res today ppm 875 ph 5.6. Also lowered the res today to the base for scrog setup & temps are still good.

Update pics
View attachment 202757View attachment 202758View attachment 202759View attachment 202760View attachment 202761View attachment 202762View attachment 202763View attachment 202764
Like this
View attachment 202765
Or bent like this View attachment 202766
Under
View attachment 202771