Harvest & Curing Boveda 62%

[HubbaBubba]

How about weed for smoking vs weed for vaping?

Do we want a lower humidity for vaping?

 

[Roark]

Can't help you there @HubbaBubba sorry.

My t.d has been with out the boveda for two weeks. Its been curing for months. Pulled the pack cause the bud just felt spongier. I hadnt gotten into it in a while. It was at 60%. Left the pack out for a few days, it stayed stable. Bud still feels different then it did. but smokes great. Cure it, remove the pack and leave it sealed.

@Trapper I'm sure they'll make a lower pack soon. I think they only made 62 cause people were buying a ton of their lowest packs and they wanted to know why....blah blah.

 

[HubbaBubba]

Can't help you there @HubbaBubba sorry.

I am just thinking out loud:
Weed for smoking needs moisture to slow the burn so you don't singe your eyebrows, is that right?

Weed for vaping, well... do we need any moisture? Vaping is boiling off the oils, does moisture help somehow?
We don't want moisture in rosin.

After the weed is fully cured, has anybody tried replacing the 62% packs with 30% packs?

 

[thetreeman]

Good question hubba, not sure if lower humidity would be beneficial for us vapors....

 

[Eyes on Fire]

essentially it all depends on where you dry your cannabis at.some dry it one way..and others another..some not. drier than some like or a lil wetter than some like. drier would ideally be suited for 62's or there about.a manual RH humidor works really great since you can dial it in..literally LOL! and wetter taking of the flowers would best be suited for low 50's range.swut I do. ive been buying 52's to try and do some different drying and textures of flowers..but 62 still work pretty damn awesome.just dont take them early is all.also lessens the chance of any molds n so on.

 

[Eyes on Fire]

less vapor or steam imo Id think it would be a lil better suited for slightly drier herbals to vape..just a gues..i could tell ya if a had a decent vape anymore..LOL! one day LOL! some great queries n comments here..nice ..Thanks!!

 

[pop22]

I've found that curing at 59-62% then letting it dry out for vaping seems best. I grind some and leave it open to dry from an hour then I store my vaping weed in an Altoids tin. It stays fresh yet dry for vaping that way.

 

[Spanglish]

I've found that curing at 59-62% then letting it dry out for vaping seems best. I grind some and leave it open to dry from an hour then I store my vaping weed in an Altoids tin. It stays fresh yet dry for vaping that way.

Exactly the same here, buds are cured and stored at high 50s low 60s and then grind up a whole grinder full and then just leave it screwed into the storage part of the grinder, can sit there for 3 days or so and be perfect for vaping, get some great kief build up this way also, especially if you give the mesh screen in the grinder a good clean with a stiff little shaver brush between grindings

 

[Fantasy Island]

I've found that curing at 59-62% then letting it dry out for vaping seems best. I grind some and leave it open to dry from an hour then I store my vaping weed in an Altoids tin. It stays fresh yet dry for vaping that way.

Ha! that's exactly what i do.... Including the Altoids tin

 

[Harry1690]

I use the 8g packs 62% they work a treat for me