Autoflower ebb n flow set up idea

[mh4l]

I want to try this for my next set up. Lmk if you have done this and any tips you have.


4x4 flood tray
Pvc made stand
50 gallon res
1000 gallon pump
2x air bubble rings
2x large air stones.
Multi digital timers
1000 gavita de hps with open hood
Many fans
12000 btu window a.c
2 burner propane co2 burner
100 lb propane tank wood box built around it and spray with bedliner inside and out . I then cover with white reflective
Big de humidifer
16 3 gal smart pots (idk if it will fit)
Cant pick if i should do hydroton or coco

 

[puggle6]

Hello chum,

I have a ebb/flow, fabric pot, (air ring in bottom of pots) constant feed hydro system with clay balls.

While not fully automated last grow this time the ebb and flow will be handled by a little giant pressure sensor and 12v solenoid.

Pressure switch here
http://www.instantpumps.com.au/index.php/little-giant/featured-products/rs-5-level-control-switch

And something like this for the solenoid
https://www.bunnings.com.au/holman-25mm-solenoid-valve-with-flow-control_p3112814

Some detail in my last grow thread that may be relevant.
https://www.autoflower.org/threads/f6-does-4-indoor-1m-x-1m-860w-cmh-hybrid-hydro.59553/

Not very well explained as the build was a work in progress along with the grow, will do a more thorough and tidier thread next grow

(sooon!)


f6