SSSC White Widow Creeps an Elephant

Mañ'O'Green

Kia ora. Retired to watch the grass grow.
Cultivators Club
Joined
Sep 15, 2016
Messages
26,408
Reputation
17,861
Reaction score
104,900
Points
0
Currently Smoking
Dabs of Rosin.
Super Sativa Seed Club Auto White Widow, Auto Creeper and Auto Elephant.

I will be experimenting with an 8/4 8/4 light schedule to see if this speeds maturity time? If I don't like the looks of it as I go I will be reverting to 18/6. I have wanted to test this for a while.

IMG_20230110_135708481.jpg




The first order of business is to get this place cleaned up.

IMG_20230110_134852428_HDR.jpg


@SuperSativaSeedClub_John Here I grow again!
 
Last edited:
Nice man, I’ll follow along! Will be interesting to see what comes of the change in light schedule.
I just harvested an Auto Elephant this week and the buds were chunky!
BEE3E38C-CA29-4F89-8FC3-10FE19F0847B.jpeg

E260EC38-6A90-4081-87D7-B52A733E9EE7.jpeg
 
Take everything out, clean the floor tray, Clean the grow pan and reservoir, CJ's Ring Away acid works the best of anything I found to clean the res and grow pan, Clean all 3 pumps, filters, Flush all lines and install new drip emitters, Put the supports and res back in the space, hook up the plumbing and pumps, test for leaks, put the humidifier and heater back in and turn the heater on to get the space up to a comfy 80°F for germination.



















Cleaned and ready to warm up.
 
Ok the space is warm, humidifier turned on, Blue Pucks turned on one of the GrowCraft turned on 50W, Starter cubes PHed and primed with 25% of week 1 nutrients. Planted!

IMG_20230112_161749376.jpg
IMG_20230112_162324475.jpg
IMG_20230112_162608561.jpg

IMG_20230112_164830170.jpg


IMG_20230112_165052538_HDR.jpg





2023-01-12_17-00-14.jpg
 
Last edited:
The sensor on my humidifier is not reading correctly and I cannot get the RH up where I want it. It also will not work with an external controller as it just goes off when power is removed.

I may have to just Bypass all of the internal circuitry and get an inkbird?
 
I just hefted my control starter cube and it was light. I fertigated the starter cubes with 150 PPM balanced nutrients with Kelp. The same mix I start with.
 
I have been pondering my experimental 8/4 8/4 schedule. The fertigation schedule will definitely require some hands on effort. I will have 4 watering times available to each daytime schedule and normally I fertigate to 10%-20% run-off by the end of the day using 8 watering times. I don't want to run up to 40% in 24 hours down the drain. I think I will shoot for 10% with each light period. Once I get the logistics down the timers will do the work :rofl: :rofl: :rofl: :rofl:

2023-01-14_21-50-53.jpg
 
Back
Top